Diese Webseite nutzt technisch notwendige Cookies, um bestmögliche Funktionalität bieten zu können.

Weitere Informationen

Publikationstabelle

Treffer 1 - 913 von 913 Ergebnissen

Seitenweise anzeigen

Titel

Autor(en)
Auslieferung von mit Postsendungen bestückten mobilen Schließfachschränken und Abholung von leeren mobilen Schließfachschränken

Gijbels, Mark
Groß, Dwi
van den Heuvel, Sebastiaan
Wolf-Monheim, Friedrich
Auslieferung von mit Postsendungen bestückten mobilen Schließfachschränken und Abholung von leeren mobilen Schließfachschränken

Gijbels, Mark
Groß, Dwi
van den Heuvel, Sebastiaan Lambertus
Wolf-Monheim, Friedrich
Wissenschaft und Gesellschaft - 1. Braucht die Universität eine Beschränkung in der Forschung? 2. Wem soll die Forschung primär dienen?

Schiffer, Carsten (Originator)
Schmid, Sebastian (Interviewee)
Meinert, Tobias (Interviewee)
Krause, Rahel (Interviewee)
Kühn, Justin (Interviewee)
Paganini, Simone (Interviewer)
Schröder, Kai-Uwe (Interviewer)
Analytical solutions of stress distribution within a hollow cylinder under contact interactions

Qi, Ge (Corresponding author)
Liu, Chen-xi
Feng, Kan
Ma, Li
Schröder, Kai-Uwe
Integration of Fatigue Estimation into Experimentable Digital Twins for Structural Applications

Schmid, Sebastian (Corresponding author)
Richstein, Rebecca
Schröder, Kai-Uwe
Using SHM for the representation of structural components over their Service Life within Digital Twins

Richstein, Rebecca (Corresponding author)
Schmid, Sebastian
Schröder, Kai-Uwe
Kinematics Design of a MacPherson Suspension Architecture Based on Bayesian Optimization

Thomas, Sinnu Susan (Corresponding author)
Palandri, Jacopo
Lakehal-Ayat, Mohsen
Chakravarty, Punarjay
Wolf-Monheim, Friedrich
Blaschko, Matthew B.
Aerodynamic and structural analysis of a partial turboelectric commuter aircraft with wingtip propellers at aircraft level

Zumegen, Jan Clemens
Strathoff, Philipp
Stumpf, Eike
Schollenberger, Michael
Lutz, Thorsten
Krämer, Ewald
Kirsch, Bastian
Friedrichs, Jens
Schubert, Martin
Dafnis, Athanasios
Schröder, Kai-Uwe
On the aeroelastic behavior of wings with distributed propulsion: simple retrofit or structural modification?

Schubert, Martin (Corresponding author)
Dafnis, Athanasios
Schröder, Kai-Uwe
MoonFibre : progress in the winder development of the MoonFibre

Niecke, Alexander (Corresponding author)
Kalapis, Stephan Klaus
Wiedehage, Tongzhou
Aranó Romero, Juan Carlos
Schröder, Kai-Uwe
Gries, Thomas
Nichtlineare Auslegung abgestrebter Transportflugzeugflügel

Schmidt, Hauke Gerjet
Numerical Analysis of a Mechanical De-icing Process by Low Frequency Oscillation of a CFRP Layer

Grubert, Felix (Corresponding author)
Nuño Spiewak, Miguel
Schröder, Kai-Uwe
Einzelradaufhängung mit Luftfederelement für eine Fahrzeughinterachse sowie entsprechend ausgestattete Fahrzeughinterachse

Wolf-Monheim, Friedrich
Von der Idee zum Bauteil : digitaler Produktionsentstehungsprozess zur Auslegung von Tailored-Fibre-Placement-Bauteilen

Emmerich, Rebecca
Quadflieg, Till Arne
Gries, Thomas
Aguirre Guerrero, Diego Armando
Konrad, Christian
Jacobs, Georg
Jang, Seoyoon
Bäß, Moritz
Schröder, Kai-Uwe
Moment-based transfer path analysis - Capability of experimental approaches

Uszynski, Olaf
Kwade, Michael
Eckstein, Lutz
Palandri, Jacopo
Wolf-Monheim, Friedrich
Reff, Björn
Schuster, Christian
Digitalisierung der Arbeit - 1. Wohlstandsgewinn oder Jobkiller? 2. Kollaps unseres Sozialsystems oder Startpunkt neuer Sozialmodelle?

Schiffer, Carsten (Originator)
Baier, Ralph Oliver (Interviewee)
Goppold, Marvin (Interviewee)
Kiesel, Raphael (Interviewee)
Klütsch, Jennifer (Interviewee)
Salzwedel, Jan
Schröder, Kai-Uwe (Interviewer)
Elastic axial stiffness properties of lattice structures: Analytical approach and experimental validation for bcc and f2cc,z unit cells

Bühring, Jannik (Corresponding author)
Soika, Johannes
Schirp, Maximilian August
Schröder, Kai-Uwe
Damage recognition of glass fiber composite bi-directional corrugated sandwich cylindrical panels via non-contacted vibration method

Deng, Shou-Ning
Wu, Dan
Yang, Jin-Shui (Corresponding author)
Luo, Hao
Fu, Lan-Ling
Schmidt, Rüdiger
Schröder, Kai-Uwe
Geklebter, kohlefaserverstärkter Querlenker mit Kugelgelenk sowie Verfahren zum Herstellen desselben

Wolf-Monheim, Friedrich
Fahrwerksvorrichtung eines elektrisch antreibbaren Kraftfahrzeugs

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Lageranordnung für eine Verbundlenkerachse sowie Verbundlenkerachse und Verfahren zum Betrieb einer Verbundlenkerachse

Wolf-Monheim, Friedrich
Mechanism of reproducible axial impact of square crash boxes

Jafarzadeh-Aghdam, Nima (Corresponding author)
Schröder, Kai-Uwe
Towards a reliable fatigue life prediction in metallic crack patching

Martens, Ulrike Silke
Experimental analysis of the thermal energy storage potential of a phase change material embedded in additively manufactured lattice structures

Piacquadio, Stefano (Corresponding author)
Schirp-Schoenen, Maximilian
Mameli, Mauro
Filippeschi, Sauro
Schröder, Kai-Uwe
Effect of Heat Treatment on Ductility and Precipitation Size of Additively Manufactured AlSi10Mg

Megahed, Sandra (Corresponding author)
Bühring, Jannik
Duffe, Tobias
Bach, Aleksandar
Schröder, Kai-Uwe
Schleifenbaum, Johannes Henrich
Fabrication and vibration isolation capacity of multilayer gradient metallic lattice sandwich panels

Li, Shuang
Yang, Jin-Shui (Corresponding author)
Yang, Fang
Schmidt, Rüdiger
Fan, Yong-Le
Wu, Lin-Zhi
Schröder, Kai-Uwe
The influence of ionizing radiation on the mechanical properties of structural adhesive joints in space

Zimmermann, Jannik
Covariate Shift for Bayesian Optimized Data while Designing MacPherson Suspension Architecture

Thomas, Sinnu Susan
Lamine, Guillaume
Palandri, Jacopo
Lakehal-ayat, Mohsen
Chakravarty, Punarjay
Wolf-Monheim, Friedrich
Blaschko, Matthew
Design of composite shear-loaded bolted joints

Wang, Jianxia
Optimized Kernel Mean Matching for an Automotive Design

Thomas, Sinnu Susan
Lamine, Guillaume
Palandri, Jacopo
Lakehal-ayat, Mohsen
Chakravarty, Punarjay
Wolf-Monheim, Friedrich
Blaschko, Matthew B.
Hybrid Additive Manufacturing of Cost-effective Automobile Parts by Die-casting (AlSi7Mg0.3 (A356)) and Selective Laser Melting (AlSi7Mg0.5 (A357)) — Effects of Substrate Surface Treatments on Bimetallic Interface Bonding Quality

Fan, Haiyang
Witvrouw, Ann
Wolf-Monheim, Friedrich
Souschek, Rainer
Yang, Shoufeng
Low frequency tyre noise mitigation in a vehicle using metal 3D printed resonant metamaterials

Sangiuliano, Luca (Corresponding author)
Reff, Björn
Palandri, Jacopo
Wolf-Monheim, Friedrich
Pluymers, Bert
Deckers, Elke
Desmet, Wim
Claeys, Claus
Federanordnung

Baranowski, Thomas
Engelke, Maximilian
Souschek, Rainer
Starke, Carsten
Wolf-Monheim, Friedrich
Achsaufhängung

Hintzen, Ralf
Zandbergen, Paul
Gerhards, Thomas
Souschek, Rainer
Mainz, Daniel
Wolf-Monheim, Friedrich
Girelli Consolaro, Alberto
Analysis of impact events at arbitrary locations for isotropic plates and their main driving variables

Kalapis, Stephan Klaus (Corresponding author)
Dafnis, Athanasios
Schröder, Kai-Uwe
Design and Qualification of a Lightweight Payload Module Optimized for Payload and AIT Flexibility

Jafarzadeh Aghdam, Nima
Zeis, Christopher
Schervan, Thomas A.
Schröder, Kai-Uwe
Stepanova, Daria
Haschemi, Pouya
Khodabakhshi, Shahrokh
Wingo, Dennis R.
Barnhart, David A.
Three-dimensional progressive damage and failure analysis of double-lap composite bolted joints under quasi-static tensile loading

Wang, Jianxia
Qin, Tianliang
Mekala, Narasimha Rao
Li, Yujun (Corresponding author)
Heidari-Rarani, Mohammad
Schröder, Kai-Uwe
Logistiksystem

Lanzerath, Horst Heribert
van den Heuvel, Bas
Gijbels, Mark
Wolf-Monheim, Friedrich
Verbund-Blattfeder mit hydraulischem Buchsenelement

Wolf-Monheim, Friedrich
FISITA Spotlight - Q&A with Dr. Friedrich Wolf-Monheim, FISITA's VP Education

Wolf-Monheim, Friedrich
A lightweight rotationally arranged auxetic structure with excellent energy absorption performance

Zhang, Wei-Ming
Li, Zhen-Yu
Yang, Jin-Shui (Corresponding author)
Ma, Li
Lin, Zhuang
Schmidt, Rüdiger
Schröder, Kai-Uwe
Verbindungsanordnung zur Verbindung einer Blattfeder und einer Lenkereinheit

Wolf-Monheim, Friedrich
Fahrwerksvorrichtung eines elektrisch antreibbaren Kraftfahrzeugs

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Längs-Blattfedervorrichtung mit Zusatz-Federungseinheit

David, Wolfgang
Zandbergen, Paul
Hintzen, Ralf
Gerhards, Thomas
Simon, Marc
Wolf-Monheim, Friedrich
Blattfederanordnung für Kraftfahrzeuge

Gerhards, Thomas
Girelli Consolaro, Alberto
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Nicole
Wolf-Monheim, Friedrich
Selbstbalancierendes Fahrzeug

Wolf-Monheim, Friedrich
Federbaugruppe

Wolf-Monheim, Friedrich
Luftfeder für Fahrwerke von Fahrzeugen

Wolf-Monheim, Friedrich
Vibration of a Satellite Structure with Composite Lattice Truss Core Sandwich Panels

Qi, Ge
Ma, Li (Corresponding author)
Bortolotti Rossini, Mayara
Schröder, Kai-Uwe
Fahrwerk für ein Kraftfahrzeug mit einem Stabilisator

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Antriebsrad mit Elektro-Radnabenmotor für Kraftfahrzeuge und Kraftfahrzeug

Wolf-Monheim, Friedrich
Fully Modular Robotic Arm Architecture Utilizing Novel Multifunctional Space Interface

Zeis, Christopher (Corresponding author)
de Alba-Padilla, C. A.
Schröder, Kai-Uwe
Grzesik, B.
Stoll, E.
Vibration damper mounting seat and motor vehicle

Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Drotar, Timothy
Zandbergen, Paul
Zandbergen, Nicole
Radaufhängung für Kraftfahrzeuge mit Querkraftkompensation

Wolf-Monheim, Friedrich
Improved approach for the panel buckling calculation of stiffened shell structures with torsional stiff stringer

Krause, Max (Corresponding author)
Lyssakow, Pawel
Schröder, Kai-Uwe
Verfahren zum Herstellen einer Schraubenfeder

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Paul
Simon, Marc
Numerical modeling for cantilever sandwich smart structures with partially covered constrained viscoelastic layer

Gao, Y. S.
Zhang, S. Q. (Corresponding author)
Zhao, G. Z.
Schmidt, R.
Static and dynamic analysis of functionally graded magneto-electro-elastic plates and shells

Zhang, Shun-Qi (Corresponding author)
Zhao, Ya-Fei
Wang, Xiang
Chen, Min
Schmidt, Rüdiger
Dynamic crushing behavior of multi-layered hybrid foam-filled composite graded lattice sandwich panels

Yang, Jin-Shui (Corresponding author)
Chen, Si-Yuan
Liu, Xu-Chang
Lin, Zhuang (Corresponding author)
Yang, Li-Hong
Schröder, Kai-Uwe
Schmidt, Rüdiger
Mechanical response and auxetic properties of composite double-arrow corrugated sandwich panels with defects

Li, Zhen-Yu
Wang, Xin-Tao
Yang, Jin-Shui (Corresponding author)
Li, Shuang
Schröder, Kai-Uwe
A methodology for detection of crack initiation in adhesively bonded joints under constant and variable amplitude fatigue loading

Gastens, Markus (Corresponding author)
Sadeghi, Mohammadzamaan
Weiland, Josef
Reisgen, Uwe
Schröder, Kai-Uwe
Empirical investigations on the effects of ionizing radiation on epoxy structural adhesives and resins : An overview

Zimmermann, Jannik (Corresponding author)
Schalm, Tobias
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Analytical stiffness analysis of adhesively bonded single-lap joints subjected to out-of-plane deflection due to tensile loading

Zimmermann, Jannik (Corresponding author)
Schalm, Tobias
Sadeghi, Mohammadzamaan
Gabener, Andre
Schröder, Kai-Uwe
Modal response and vibration attenuation of carbon fiber composite sandwich cylindrical panels made of bi-directional corrugated strip cores

Li, Shuang
Yang, Jin-Shui (Corresponding author)
Chen, Si-Yuan
Zhang, Wei-Ming
Schmidt, Rüdiger
Schröder, Kai-Uwe
Yang, Li-Hong
Wu, Lin-Zhi
From Industry to Academia : Assessing Global Technology Trends

Aufrère, Christophe
El Ganaoui-Mourlan, Ouafaé
Wolf-Monheim, Friedrich
Zhang, Xuming
Bearing eye for a leaf spring and leaf spring having a bearing eye

Palandri, Jacopo
Souschek, Rainer
Hintzen, Ralf
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Reff, Björn
Gerhards, Thomas
Zandbergen, Paul
New horizons for exploration via flexible concepts based on building blocks using the standardized ISSI (Intelligent Space System Interface) modular coupling kit by iBOSS

Schervan, Thomas A. (First author)
Kreisel, Joerg
Schröder, Kai-Uwe
Wingo, Dennis R.
Vehicle suspension

Chakravarty, Punarjay
Lakehal-ayat, Mohsen
Blaschko, Matthew
Thomas, Sinnu Susan
Palandri, Jacopo
Wolf-Monheim, Friedrich
Lagerauge für eine Blattfeder sowie Blattfeder mit einem Lagerauge

Palandri, Jacopo
Souschek, Rainer
Hintzen, Ralf
Consolaro, Alberto Girelli
Wolf-Monheim, Friedrich
Reff, Björn
Gerhards, Thomas
Zandbergen, Paul
Federungsvorrichtung zur Federung eines Fahrgestells eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Zandbergen, Paul
Girelli Consolaro, Alberto
Hintzen, Ralf
Italiano, Francesco
Hartnack, Claudia
Anschlagpufferungsvorrichtung mit progressiv ansteigender Federcharakteristik

Wolf-Monheim, Friedrich
Girelli Consolaro, Alberto
Zandbergen, Paul
Hintzen, Ralf
Italiano, Francesco
Hartnack, Claudia
Achsaufhängung für ein Fahrzeug

Hintzen, Ralf
Italiano, Francesco
Girelli Consolaro, Alberto
Gerhards, Thomas
Wolf-Monheim, Friedrich
Zandbergen, Paul
Integrierte Luftfeder- und Stoßdämpfervorrichtung mit stufenloser Einstellbarkeit

Wolf-Monheim, Friedrich
On the phenomenon of impact

Kalapis, Stephan Klaus (Corresponding author)
Dafnis, Athanasios
Schröder, Kai-Uwe
Vibration damper, in particular adjustable damping vibration absorber for motor vehicles

Wolf-Monheim, Friedrich
Control arm and wheel suspension for connecting a wheel to a vehicle

Wolf-Monheim, Friedrich
Wheel suspension for a motor vehicle

Carlitz, Andreas
Drotar, Timothy
Mainz, Daniel
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Wheel suspension for a motor vehicle

Wolf-Monheim, Friedrich
Fork-shaped lever for a wheel suspension of a steerable wheel in a motor vehicle

Wolf-Monheim, Friedrich
Radaufhängung

David, Wolfgang
Frantzen, Michael Johannes
Halfmann, Edmund
Wolf-Monheim, Friedrich
Souschek, Rainer
Lenker für die Anbindung eines Fahrzeugrads an ein Fahrzeug sowie Fahrzeugradaufhängung

Wolf-Monheim, Friedrich
Federbeinlager, Federbein und Kraftfahrzeug

Wolf-Monheim, Friedrich
Federlenker und Kraftfahrzeug

Wolf-Monheim, Friedrich
Numerical Analysis of a Mechanical De-Icing Process by Low Frequency Oscillation of a CFRP Layer

Grubert, Felix (Corresponding author)
Nuño, Miguel
Schröder, Kai-Uwe
Radaufhängung für ein Fahrzeug

Hintzen, Ralf
Wolf-Monheim, Friedrich
Federbaugruppe

Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Gerhards, Thomas
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Achsaufhängung

Hintzen, Ralf
Zandbergen, Paul
Gerhards, Thomas
Souschek, Rainer
Mainz, Daniel
Wolf-Monheim, Friedrich
Girelli Consolaro, Alberto
Längsblattfedervorrichtung mit Anschlagpuffer-Einheit

Wolf-Monheim, Friedrich
SmartSHM - Effiziente Zustandsüberwachung struktureller Klebungen

Weiland, Josef (Corresponding author)
Sadeghi, Mohammadzamaan
Gastens, Markus
Janetzko-Preisler, Andreas
Schiebahn, Alexander
Schröder, Kai-Uwe
Reisgen, Uwe
Längsblattfedervorrichtung zur Federung einer Kraftfahrzeugkarosserie

Wolf-Monheim, Friedrich
Blattfederanordnung für Kraftfahrzeuge

Wolf-Monheim, Friedrich
Achsaufhängung

Wolf-Monheim, Friedrich
Blattfedereinheit

Wolf-Monheim, Friedrich
Federvorrichtung zur Federung eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Anordnung in einem Kraftfahrzeug zum Erfassen der Bremswirkung eines Bremssystems, ein Kraftfahrzeug mit der Anordnung sowie ein Verfahren zum Kontrollieren einer aktuellen Bremswirkung in Bezug auf die Stärke einer entsprechenden Bremsbetätigung

Wolf-Monheim, Friedrich
Kopplungsvorrichtung zur mechanischen Kopplung einer Blattfederanordnung

Souschek, Rainer
Hintzen, Ralf
Gerhards, Thomas
Wolf-Monheim, Friedrich
Lagerauge für eine Blattfeder sowie Blattfeder mit einem Lagerauge

Palandri, Jacopo
Souschek, Rainer
Hintzen, Ralf
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Reff, Björn
Gerhards, Thomas
Zandbergen, Paul
Investigation of biogenic materials and ferroelectrets for energy harvesting on vibrating aircraft structures

Holzmann, H. (Corresponding author)
Weber, Maximilian
Park, Y. J.
Perfetto, S.
Atzrodt, H.
Dafnis, Athanasios Dimitri
Structural Health Monitoring of Sandwich Structures with Lattice Cores in Aircraft Design: Challenges and Potential

Huang, Tianxiang (Corresponding author)
Nuño, Miguel (Corresponding author)
Schröder, Kai-Uwe
Shock absorber mount

Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Drotar, Timothy
Zandbergen, Paul
Zandbergen, Nicole
Spring assembly for a vehicle suspension

Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Gerhards, Thomas
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Trailing-arm suspension with leaf springs

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Wolf-Monheim, Friedrich
Zandbergen, Paul
Suspension control arm with integrated resilient element

Mainz, Daniel
Wolf-Monheim, Friedrich
Souschek, Rainer
Longitudinal leaf spring device having bump stop unit

Wolf-Monheim, Friedrich
The influence of polymeric interlayers on damping behavior of a fiber metal laminate

Bortolotti Rossini, Mayara (Corresponding author)
Schröder, Kai-Uwe
Mekala, Narasimha Rao
Chaves-Vargas, Mauricio
Motor vehicle leaf spring assembly

Gerhards, Thomas
Girelli Consolaro, Alberto
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Wolf-Monheim, Friedrich
Zandbergen, Nicole
Vehicle suspension unit

David, Wolfgang
Zandbergen, Paul
Gerhards, Thomas
Hintzen, Ralf
Simon, Marc
Wolf-Monheim, Friedrich
Control arm with ball-and-socket joint and method for manufacturing same

Wolf-Monheim, Friedrich
Vehicle chassis for an electrically powered vehicle

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Motor vehicle rear wheel suspension system

Wolf-Monheim, Friedrich
Motor vehicle wheel suspension

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Wolf-Monheim, Friedrich
The Integral Bushing Rear Suspension Architecture of the New Lincoln Corsair - Prototype Build and Testing

Wolf-Monheim, Friedrich
Zandbergen, P.
Mainz, D.
Hintzen, R.
Drotar, T.
High-Speed Camera based Experimental Modal Analysis for Dynamic Testing of an Automotive Coil Spring

Egner, F. S.
Wang, Y.
Willems, T.
Kirchner, M.
Pluymers, B.
Desmet, W.
Palandri, J.
Reff, B.
Wolf-Monheim, Friedrich
Low Frequency Tyre Noise Mitigation in a Vehicle Using Metal 3D Printed Resonant Metamaterials

Sangiuliano, Luca
Reff, Björn
Palandri, Jacopo
Wolf-Monheim, Friedrich
Pluymers, Bert
Deckers, Elke
Desmet, Wim
Claeys, Claus
Delamination Testing of AlSi10Mg Sandwich Structures with Pyramidal Lattice Truss Core made by Laser Powder Bed Fusion

Nuño, Miguel (First author)
Bühring, Jannik (Corresponding author)
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Integration and evaluation of a meander-shaped fibre-optical sensor in a GFRP leaf spring

Janetzko-Preisler, Andreas (Corresponding author)
Wolf-Monheim, Friedrich
Souschek, Rainer
Kaiser, Dominik
Wojtczyk, Ralph
Dafnis, Athanasios
Schröder, Kai-Uwe
David, Wolfgang
Zandbergen, Paul
Delamination assessment of a composite laminate interleaved with electrospun TPU fibers under Mode-I and Mode-II loading

Rossini, Mayara B. (Corresponding author)
Sadeghi, Mohammadzamaan
Quadflieg, Till Arne
Schneiders, Thomas Axel
Gries, Thomas
Schröder, Kai-Uwe
Influence of Degradation Product Thickness on the Elastic Stiffness of Porous Absorbable Scaffolds Made from an Bioabsorbable Zn-Mg Alloy

Bühring, Jannik (Corresponding author)
Voshage, Maximilian Alfons
Schleifenbaum, Johannes Henrich
Jahr, Holger
Schröder, Kai-Uwe
Damping identification methods from complex modes for dynamic substructuring

Chaves Vargas, Mauricio
The finite cell method for the prediction of machining distortion caused by initial residual stresses in milling

Landwehr, M.
Schmid, Sebastian
Holla, V.
Ganser, P.
Bergs, Thomas
Ruess, M.
Schröder, Kai-Uwe
The finite cell method for the prediction of machining distortion caused by initial residual stresses in milling

Landwehr, M. (Corresponding author)
Schmid, Sebastian
Holla, V.
Ganser, P.
Bergs, Thomas
Ruess, M.
Schröder, Kai-Uwe
Methodical Development of a Structural Health Monitoring System for COPV Supported by a Digital Shadow

Richstein, Rebecca (Corresponding author)
Reichartz, Thorsten
Janetzko-Preisler, Andreas
Schröder, Kai-Uwe
A methodology for detection of crack initiation in adhesively bonded joints under constant and variable amplitude fatigue loading

Gastens, Markus (Corresponding author)
Sadeghi, Mohammadzamaan
Weiland, Josef
Reisgen, Uwe
Schröder, Kai-Uwe
Dynamic Buckling of Crash Boxes Under an Impact Load

Jafarzadeh Aghdam, Nima (Corresponding author)
Schröder, Kai-Uwe
Empirical investigations on the effects of ionizing radiation on epoxy structural adhesives and resins: An overview

Zimmermann, Jannik (Corresponding author)
Schalm, Tobias
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Effiziente Zustandsüberwachung struktureller Klebungen

Weiland, Josef (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe
Sadeghi, Mohammadzamaan
Gastens, Markus
Janetzko-Preisler, Andreas
Schröder, Kai-Uwe
IWSHM 2019 : Perturbation-based Bayesian damage identification using responses at vibration nodes

Huang, Tianxiang (Corresponding author)
Schröder, Kai-Uwe
Experimental investigation on reduction of broaching forces by active external vibrations

Ying, Shen-Shun
Zhang, Shun-Qi (Corresponding author)
Lin, Lv-Gao
Wang, Yang-Yu
Schmidt, Rüdiger
Additively Manufactured Absorbable Porous Metal Implants : Processing, Alloying and Corrosion Behavior

Jahr, Holger (Corresponding author)
Li, Yageng
Zhou, Jie
Zadpoor, Amir A.
Schröder, Kai-Uwe
A coupled structural and economical design procedure for shell structures

Lyssakow, Pawel
Versagensverhalten dünnwandiger Profilstäbe unter Drucklast

Lakshmanan, Martin Anand
Potential of Metallurgical Gradients in the Design of Structural Components Made of Nodular Cast Iron

Ripplinger, Christoph (Corresponding author)
Gastens, Markus (Corresponding author)
Zimmermann, Jannik
Pustal, Björn
Broeckmann, Christoph
Schröder, Kai-Uwe
Bührig-Polaczek, Andreas
Integration of eddy current sensors into repair patches for fatigue reinforcement at rivet holes

Schmid, Sebastian (Corresponding author)
Martens, Ulrike
Schomburg, Werner Karl
Schröder, Kai-Uwe
Experimental and numerical investigation of adhesively bonded additive manufactured sandwich structures with a pyramidal lattice core

Bühring, Jannik (Corresponding author)
Zimmermann, Jannik
Sadeghi, Mohammadzamaan
Akhavan-Safar, Alireza
da Silva, Lucas Filipe Martins
Schröder, Kai-Uwe
Nonwoven-Based Composite Sheets with Constant Areal Weight as Fuselage Skin Material for Light-Aircraft Applications

Nuño, Miguel
Krause, Max
Abel, Philipp
Schröder, Kai-Uwe
upBUS : Nahtlose Mobilität zwischen Bus und Seilbahn am Beispiel des Düsseldorfer Medienhafens

Meinert, Tobias (Corresponding author)
Berndt, Dominik
Bierbüsse, David
Heidebrecht, Eduard
Chaves-Vargas, Mauricio
Negra, Renato
Schröder, Kai-Uwe
Fracture characterisation of adhesively bonded joints under mixed-mode loading

Sadeghi, Mohammed Zamaan
Advances in multifunctional graphene-geopolymer composites

Huang, Tianxiang
Sun, Zengqing (Corresponding author)
Large deflection electro-mechanical analysis of composite structures bonded with macro-fiber composite actuators considering thermal loads

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger
Schröder, Kai-Uwe
Integration and evaluation of a meander-shaped fibre-optical sensor in GFRP coupons

Janetzko-Preisler, Andreas (Corresponding author)
Wolf-Monheim, Friedrich
Kaiser, Dominik
Wojtczyk, Ralph
Dafnis, Athanasios
Schröder, Kai-Uwe
David, Wolfgang
Zandbergen, Paul
Additive manufactured sandwich structures : Mechanical characterization and usage potential in small aircraft

Bühring, Jannik (Corresponding author)
Nuño, Miguel (Corresponding author)
Schröder, Kai-Uwe
Analysis of mass and cost drivers of unstiffened isotropic shell structures considering their imperfection sensitivity

Lyssakow, Pawel (Corresponding author)
Yang, Jiahui
Krause, Max
Schröder, Kai-Uwe
Compression and hysteresis responses of multilayer gradient composite lattice sandwich panels

Li, Shuang
Yang, Jin-Shui (Corresponding author)
Schmidt, Rüdiger
Wu, Lin-Zhi
Schröder, Kai-Uwe
Monitoring multiple damage mechanisms in crack‐patched structures using optical infrared thermography

Martens, Ulrike (Corresponding author)
Schröder, Kai-Uwe
A Bayesian probabilistic approach for damage identification in plate structures using responses at vibration nodes

Huang, Tianxiang (Corresponding author)
Schröder, Kai-Uwe
Dynamic responses of hybrid lightweight composite sandwich panels with aluminium pyramidal truss cores

Yang, Jin-Shui (Corresponding author)
Chen, Si-Yuan
Li, Shuang
Pang, Yue-Zhao
Schmidt, Rüdiger
Schröder, Kai-Uwe
Qu, Jia
Wu, Lin-Zhi
A refined disturbance rejection control for vibration suppression of smart structures under unknown disturbances

Zhang, Shun-Qi
Zhang, Xiao-Yu
Ji, Hong-Li
Ying, Shen-Shun (Corresponding author)
Schmidt, Rüdiger
On the bondline thickness effect in mixed-mode fracture characterisation of an epoxy adhesive

Sadeghi, Mohammadzamaan (Corresponding author)
Zimmermann, Jannik
Gabener, A.
Schröder, Kai-Uwe
It is all about the plug - Key technology and possibilities of intermodal transportation systems

Schröder, Kai-Uwe
FISITA Plus 2020 - Session 2: Future Technologies

Davis, Geoff (Contributor)
Everett, Andrew (Contributor)
Wolf-Monheim, Friedrich (Contributor)
Rear wheel suspension

Wolf-Monheim, Friedrich
Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Allen, Steve Scott
Control circuit for monitoring a brake system

Wolf-Monheim, Friedrich
Multi-link independent suspension system with integrated spring and steering function for electric vehicles or motor vehicles with gas tanks

Wolf-Monheim, Friedrich
Axle assembly

Wolf-Monheim, Friedrich
Streamlined requirements management and matchmaking between space payloads and satellite bus enabled by Industry4.0 transformation and data intelligence

Haschemi, Pouya (First author)
Khodabakhshi, Shahrokh
Schervan, Thomas A.
Ballheimer, Walter
Karaca, Hilal
Drive wheel for a motor vehicle with an electric hub motor and motor vehicle

Wolf-Monheim, Friedrich
Vehicle integral bushing rear suspension systems

Wolf-Monheim, Friedrich
Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Allen, Steve Scott
Fahrzeugkomponente für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Reff, Björn
Palandri, Jacopo
Radträger für ein Fahrzeug

Wolf-Monheim, Friedrich
Mainz, Daniel
Schwingungsdämpfer, Dämpfersystem und Radaufhängung

Wolf-Monheim, Friedrich
Kugelgelenk mit integrierter Kraftmessung und Verschleißerkennung

Wolf-Monheim, Friedrich
Souschek, Rainer
Gerhards, Thomas
Girelli Consolaro, Alberto
Kopplungsvorrichtung zur mechanischen Kopplung einer Blattfederanordnung

Souschek, Rainer
Gerhards, Thomas
Hintzen, Ralf
Wolf-Monheim, Friedrich
Hinterradaufhängung

Wolf-Monheim, Friedrich
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Drotar, Timothy
Allen, Steve Scott
Lagereinheit für ein Kugelgelenk, Kugelgelenk und Kraftfahrzeug

Wolf-Monheim, Friedrich
Vorrichtung zum lokalen Fixieren eines Fahrgastzelleninnenauskleidungselements an einem Karosseriebauteil sowie Baugruppe und Klimaanlage mit einer solchen Vorrichtung

Wolf-Monheim, Friedrich
System und Verfahren zur Schadensfrüherkennung

Wolf-Monheim, Friedrich
Siebertz, Karl
Mehrlenker-Einzelradaufhängungssystem mit integrierter Feder- und Lenkfunktion für Elektrofahrzeuge oder Kraftfahrzeuge mit Gastank

Wolf-Monheim, Friedrich
Damper unit with semi-active damping device for suspension system

Wolf-Monheim, Friedrich
Subframe for a motor vehicle

Wolf-Monheim, Friedrich
Einzelradaufhängung mit selbsttätiger Sturzanpassung

Wolf-Monheim, Friedrich
Verfahren zum Betrieb einer Hinterradlenkung sowie Hinterradlenkung für ein Fahrzeug

Wolf-Monheim, Friedrich
Verfahren zur Steuerung eines Luftfedersystems eines Fahrzeug-Fahrwerks sowie Luftfedersystem für ein Fahrzeug-Fahrwerk

Wolf-Monheim, Friedrich
Hinterradaufhängung, insbesondere Integral-Hinterradaufhängung mit Luftfeder für ein Fahrzeug

Wolf-Monheim, Friedrich
Anordnung aus einem Kraftfahrzeug und einer Drohne

Wolf-Monheim, Friedrich
Einzelradaufhängungsvorrichtung mit aktiver Spursteuerung eines Hinterrads eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Multi-link suspension for a motor vehicle

Girelli Consolaro, Alberto
Zandbergen, Paul
Mainz, Daniel
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Souschek, Rainer
Chen, Brian
Control arm for wheel suspension

Wolf-Monheim, Friedrich
Vehicle suspension

Wolf-Monheim, Friedrich
Wheel carrier for a vehicle suspension

Wolf-Monheim, Friedrich
Feedback operation of a vehicle brake pedal

Wolf-Monheim, Friedrich
Leaf spring suspension

Hintzen, Ralf
Zandbergen, Paul
Gerhards, Thomas
Souschek, Rainer
Mainz, Daniel
Wolf-Monheim, Friedrich
Girelli Consolaro, Alberto
Motor vehicle including device for delimitation of extended loading area and method of use

Wolf-Monheim, Friedrich
Longitudinal leaf spring device for suspension of a motor vehicle body

Wolf-Monheim, Friedrich
Method for leaf springs made of fiber-reinforced plastic with integrated eye bushings, and leaf spring made of fiber-reinforced plastic

Wolf-Monheim, Friedrich
HVAC arrangement including a motor vehicle and a drone

Wolf-Monheim, Friedrich
Semi-trailing arm suspension for a motor vehicle

Wolf-Monheim, Friedrich
Vehicle leaf spring assembly

Wolf-Monheim, Friedrich
Vehicle suspension having a leaf spring and a control arm joined by elastomer connector

Wolf-Monheim, Friedrich
Vehicle rear wheel suspension with track control

Wolf-Monheim, Friedrich
Axle assembly

Wolf-Monheim, Friedrich
Faseroptische Schadensüberwachung von GFK-Blattfedern mittels struktureller Schadensindikatoren

Janetzko-Preisler, Andreas
Dafnis, A.
Schröder, Kai-Uwe
Wolf-Monheim, Friedrich
David, W.
Zandbergen, P.
upBUS : Electrical, autonomous driving, transmodular bus for public transport systems

Meinert, Tobias
Chaves-Vargas, Mauricio
Bierbüsse, David
Heidebrecht, Eduard
Negra, Renato
Schröder, Kai-Uwe
Verfahren zur Einstellung der Deformation eines Sicherheitselements eines Fahrzeugs und ein entsprechendes Sicherheitselement

Bach, Aleksandar
Pasligh, Niels
Schröder, Kai-Uwe
Lyssakow, Pawel
Jafarzadeh Aghdam, Nima
3732. Class II & 1/2 Mass Estimation of Light Aircraft Composite Wings

Nuño, Miguel
Schröder, Kai-Uwe
upBUS - Electrical, autonomous driving, transmodular bus for public transport systems

Chaves-Vargas, Mauricio
Bierbüsse, David
Heidebrecht, Eduard
Negra, Renato
Schröder, Kai-Uwe
Critical design of a MoonFibre experimental apparatus for the use on a REXUS sounding rocket

Panajotovic, Stefan
Caroline, Krämer
Leon, Wiesen
Lukas, Rodeck
Gerrit, Niehuss
Schitt-Vaupel, Jonathan
Johannes, Hoormann
Robin, Duhnsen
Robert, Sternschulte
Jaspar, Meister
Maximilian, Schirp-Schoenen
Ines, Gehring
Anthony, Pham
Felix, Gertdenken
Sunny, Singh
Jannis, Bergmann
Can, Özmaden
Leon, Dülberg
Panel buckling of stiffened shell structures with torsional stiff stringer

Krause, Max (Corresponding author)
Lyssakow, Pawel
Friedrich, Linus Michael
Schröder, Kai-Uwe
Characteristics of an improved boundary insert for sandwich panels with lattice truss cores

Qi, Ge
Chen, Yun-Long
Rauschen, Philip Bastian
Schröder, Kai-Uwe
Ma, Li (Corresponding author)
NEW APPROACH ON ROBOTIC ARM DESIGN: FULLY MODULAR ARM ARCHI-TECTURE UTILIZING NOVEL SPACE INTERFACE

Kortmann, Martin
Zeis, Christopher
Schröder, Kai-Uwe
Padilla, Carlos de Alba
Grzesik, Benjamin
Stoll, Enrico
Experimental and FE investigations on the influential parameters in positioning and measurement of strain gauges in adhesively bonded single lap joints

Sadeghi, Mohammadzamaan (Corresponding author)
Weiland, Josef
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed mode bending tests

Sadeghi, Mohammadzamaan (Corresponding author)
Zimmermann, Jannik
Saravana, Kumar
Gabener, Andre
Dafnis, Athanasios
Schröder, Kai-Uwe
Simplified stiffness analysis for degraded single lap joints in the space sector : Comparative analytical and finite element analysis

Zimmermann, Jannik (Corresponding author)
Weiland, Josef
Sadeghi, Mohammadzamaan
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Bayesian probabilistic damage identification using responses at vibration nodes

Huang, Tianxiang
Towards a manufacturing signature for unstiffened flow formed thin-walled shell structures

Lyssakow, Pawel (Corresponding author)
Krause, Max
Schröder, Kai-Uwe
Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed-mode bending tests

Sadeghi, Mohammadzamaan
Zimmermann, Jannik
Kumar, Saravana
Andre, Gabener
Dafnis, Athanasios
Schröder, Kai-Uwe
Experimental and FE investigations on the influential parameters in positioning and measurement of strain gauges in adhesively bonded single lap joints

Sadeghi, Mohammadzamaan
Weiland, Josef
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Analysis of boundary condition in modelling the low-velocity impact carbon-fiber reinforced polymer composite laminates

Meon, Mohd Suhairil Bin (Corresponding author)
Saedon, J. B.
Nor, N. H.
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Capability analysis of Puck damage model in predicting the damage behavior of unidirectional composite laminates under different scenarios

Meon, Mohd Suhairil Bin (Corresponding author)
Husain, H.
Saedon, J. B.
Shawal, S.
Mohamad Nor, N. H.
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Design of a Moonfibre Spinning Apparatus for the Use on a REXUS Research Rocket

Krämer, Caroline
Piacquadio, Stefano
Panajotovic, Stefan
Rodeck, Lukas
Wiesen, Leon
Dülberg, Leon
Schott-Vaupel, Jonathan
Gertdenken, Felix
Dodon, Mihail
Sternschulte, Robert
Singh, Sunny
Hoofmann, Johannes
Duhnsen, Robin
Meister, Jaspar
Schirp, Maximilian August
Lange, Robin
Gehring, Ines
Pham, Anthony
Kalapis, Stephan Klaus
Meinert, Tobias
Lüking, Alexander
Niecke, Alexander
Schröder, Kai-Uwe
Gries, Thomas
Low velocity impact behavior of carbon fibre composite curved corrugated sandwich shells

Yang, Jin-Shui (Corresponding author)
Zhang, Wei-Ming
Yang, Fang
Chen, Si-Yuan
Schmidt, Rüdiger
Schröder, Kai-Uwe
Ma, Li
Wu, Lin-Zhi
Vibration-based damage diagnosis of composite sandwich panels with bi-directional corrugated lattice cores

Yang, Jin-Shui (Corresponding author)
Liu, Zhi-Da
Schmidt, Rüdiger
Schröder, Kai-Uwe
Ma, Li
Wu, Lin-Zhi (Corresponding author)
A hybrid joining insert for sandwich panels with pyramidal lattice truss cores

Qi, Ge
Chen, Yun-Long
Richert, Philip Bastian
Ma, Li (Corresponding author)
Schröder, Kai-Uwe
Leichtbau 4.0 : Grundlagen und Potenziale des Structural Health Monitorings

Schröder, Kai-Uwe (Corresponding author)
Janetzko-Preisler, Andreas
Bayesian probabilistic damage characterization based on a perturbation model using responses at vibration nodes

Huang, Tianxiang (Corresponding author)
Schröder, Kai-Uwe
Development of a Piezoelectric Transducer-Based Integrated Structural Health Monitoring System for Impact Monitoring and Impedance Measurement

Guo, Ziyi (Corresponding author)
Huang, Tianxiang
Schröder, Kai-Uwe
SmartSHM - Effiziente Zustandsüberwachung struktureller Klebungen

Weiland, Josef (Corresponding author)
Sadeghi, Mohammadzamaan
Schiebahn, Alexander
Schröder, Kai-Uwe
Reisgen, Uwe
Stiffness Calculation Scheme for Degraded Single Lap Joints in the Space Sector : Numerical and Analytical Investigation

Zimmermann, Jannik (Corresponding author)
Weiland, Josef
Sadeghi, Mohammadzamaan
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
upBUS - Mögliche Anwendungen eines transmodularen Busses im Ruhrgebiet

Meinert, Tobias (Corresponding author)
Berndt, Dominik
Bierbüsse, David
Heidebrecht, Eduard
Chaves-Vargas, Mauricio
Negra, Renato
Schröder, Kai-Uwe
Evaluation of infrared thermography methods for analysing the damage behaviour of adhesively bonded repair solutions

Martens, U. (Corresponding author)
Efficient damage detection and assessment based on structural damage indicators

Preisler, Andreas
Influence of Dynamic Flap Movement on Maximum Lift and Wake Vortex Evolution

Stephan, Ralph (Corresponding author)
Bremm, Martin Josef
Hörnschemeyer, Ralf Gerd
Stumpf, Eike
Schmidt, Hauke Gerjet
Schröder, Kai-Uwe
Ruhland, J.
Breitsamter, C.
Analysis of back-face strain measurement for adhesively bonded single lap joints using strain gauge, Digital Image Correlation and finite element method

Weiland, Josef (Corresponding author)
Sadeghi, Mohammadzamaan
Thomalla, Jonas Volker
Schiebahn, Alexander
Schröder, Kai-Uwe
Reisgen, Uwe
Computation-assisted analyzing and forecasting on impurities removal behavior during zone refining of antimony

Zhang, Xiaoxin
Friedrich, Semiramis (Corresponding author)
Liu, Bin
Huang, Tianxiang
Friedrich, Bernd
Damage detection in adhesively bonded single lap joints by using backface strain : proposing a new position for backface strain gauges

Sadeghi, Mohammadzamaan (Corresponding author)
Weiland, Josef
Janetzko-Preisler, Andreas
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Exposure of structural epoxy adhesive to combination of tensile stress and γ-radiation

Zimmermann, Jannik (Corresponding author)
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Contactless geometric and thickness imperfection measurement system for thin-walled structures

Lyssakow, Pawel (Corresponding author)
Friedrich, Linus Michael
Krause, Max
Dafnis, Athanasios Dimitri
Schröder, Kai-Uwe
Independent rear wheel suspension system for motor vehicles, especially electric motor vehicles

Wolf-Monheim, Friedrich
Independent wheel suspension device with active wheel distance control function for rear wheel of motor vehicle

Wolf-Monheim, Friedrich
Lateral suspension system connector

Wolf-Monheim, Friedrich
Vehicle suspension having a leaf spring and a control arm joined by an elastomer connector

Wolf-Monheim, Friedrich
Wheel and its manufacturing method

Wolf-Monheim, Friedrich
Vehicle chassis for electrically powered vehicle

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Glue-connected and carbon fiber-reinforced control arm with ball-and-socket joint and method for manufacturing same

Wolf-Monheim, Friedrich
Longitudinal leaf spring device with auxiliary suspension unit

David, Wolfgang
Zandbergen, Paul
Gerhards, Thomas
Hintzen, Ralf
Simon, Marc
Wolf-Monheim, Friedrich
Leaf spring assembly for motor vehicles

Wolf-Monheim, Friedrich
Independent rear suspension for motor vehicles with electric drive train

Wolf-Monheim, Friedrich
Leaf spring assembly for motor vehicles

Gerhards, Thomas
Girelli Consolaro, Alberto
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Wolf-Monheim, Friedrich
Zandbergen, Nicole
Method of manufacturing a leaf spring made of fiber-reinforced plastic having an integrated eye bushing, and a leaf spring made of fiber-reinforced plastic

Wolf-Monheim, Friedrich
Longitudinal leaf spring device for motor vehicle body suspension

Wolf-Monheim, Friedrich
Longitudinal leaf spring device having bump stop unit

Wolf-Monheim, Friedrich
Wheel suspension

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Suspension control arm with integrated elastic element

Mainz, Daniel
Wolf-Monheim, Friedrich
Souschek, Rainer
Motor vehicles including apparatus for defining extended loading areas and methods of use thereof

Wolf-Monheim, Friedrich
Leaf spring suspension

Hintzen, Ralf
Zandbergen, Paul
Gerhards, Thomas
Souschek, Rainer
Mainz, Daniel
Wolf-Monheim, Friedrich
Girelli Consolaro, Alberto
Trailing-arm suspension with leaf springs

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Wolf-Monheim, Friedrich
Zandbergen, Paul
Motor vehicles

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Wolf-Monheim, Friedrich
Method of operating a brake pedal unit that provides feedback to the operator of the brake pedal unit of the vehicle and the brake pedal unit

Wolf-Monheim, Friedrich
Spring assembly

Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Gerhards, Thomas
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Multi link rear axle and motor vehicles

Girelli Consolaro, Alberto
Zandbergen, Paul
Mainz, Daniel
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Souschek, Rainer
Chen, Brian
Radaufhängung

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Motor vehicle with an independent suspension

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Wolf-Monheim, Friedrich
Robuste, kosteneffiziente Verbundblattfeder mit integrierter Lagerbuchse

Wolf-Monheim, Friedrich
Achsaufhängung

Wolf-Monheim, Friedrich
Fahrzeugbauteil

Wolf-Monheim, Friedrich
Längs-Blattfedervorrichtung mit verbesserter Quersteifigkeit zur Federung einer Karosserie eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Verbindungsstück für transversales Federungssystem

Wolf-Monheim, Friedrich
Fahrzeugrad und Verfahren zu seiner Herstellung

Wolf-Monheim, Friedrich
Hinterrad-Einzelaufhängung eines Kraftfahrzeugs mit einem elektrischen Antriebsstrang

Wolf-Monheim, Friedrich
Blattfeder aus mehrlagigem, faserverstärktem Kunststoffmaterial für Kraftfahrzeuge und Blattfederanordnung mit Blattfeder

Zandbergen, Paul
Girelli Consolaro, Alberto
Italiano, Francesco
Wolf-Monheim, Friedrich
Radaufhängung

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Hybridlenker einer Radaufhängung mit integrierter Federfunktion

Mainz, Daniel
Wolf-Monheim, Friedrich
Souschek, Rainer
Seitliche Begrenzung für eine Ladeflächenverlängerung

Wolf-Monheim, Friedrich
Achsaufhängung

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Wolf-Monheim, Friedrich
Kraftfahrzeug

Hintzen, Ralf
Gerhards, Thomas
Mainz, Daniel
Souschek, Rainer
Zandbergen, Paul
Wolf-Monheim, Friedrich
Querlenker aus faserverstärktem Kunststoff für die Radaufhängung eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Radaufhängung

Wolf-Monheim, Friedrich
Verfahren zum Betrieb einer Bremspedaleinheit eines Fahrzeugs, mit Rückmeldung an einen Bediener der Bremspedaleinheit, und Bremspedaleinheit

Wolf-Monheim, Friedrich
Radaufhängung für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Mehrlenkerhinterachse und Kraftfahrzeug

Girelli Consolaro, Alberto
Zandbergen, Paul
Mainz, Daniel
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Souschek, Rainer
Chen, Brian
Bearing device for twist beam axle and twist beam axle

Wolf-Monheim, Friedrich
Wheel suspension for vehicle

Hintzen, Ralf
Wolf-Monheim, Friedrich
Method for operating rear wheel steering system and rear wheel steering system of vehicle

Wolf-Monheim, Friedrich
Stoßdämpfer mit variabler Dämpfung und Verfahren zum Einstellen der Dämpfungseigenschaften eines Stoßdämpfers

Wolf-Monheim, Friedrich
Herstellungsverfahren für Blattfedern aus faserverstärktem Kunststoff mit integrierten Augenbuchsen und Blattfeder aus faserverstärktem Kunststoff

Wolf-Monheim, Friedrich
Hinterrad-Einzelaufhängungssystem eines Kraftfahrzeugs, insbesondere eines elektrisch angetriebenen Kraftfahrzeugs

Wolf-Monheim, Friedrich
Achsbaugruppe

Wolf-Monheim, Friedrich
Baugruppe für eine Radaufhängung eines Fahrzeugs

Wolf-Monheim, Friedrich
Motor vehicle wheel suspension

Wolf-Monheim, Friedrich
Vehicle wheel suspension

Zandbergen, Nicole
Souschek, Rainer
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Designing MacPherson Suspension Architectures using Bayesian Optimization

Thomas, S. S.
Palandri, J.
Lakehal-Ayat, M.
Chakravarty, P.
Wolf-Monheim, Friedrich
Blaschko, M.
Additive Manufactured Metallic Sandwich Structures with Lattice Cores: Usage Potential in Small Aircraft Applications

Schröder, Kai-Uwe
Bühring, Jannik (First author)
Nuño, Miguel (First author)
Modelling Low-Velocity Impact on Composite Laminate Considering Inter- and Intralaminar Damage

Mekala, Narasimha Rao
Meon, Suahiril (Corresponding author)
Nor, N. H. Mohamad
Shawal, S.
Saedon, J. B.
Rao, M. N.
Schröder, Kai-Uwe
Multifunctional load-bearing aerostructures with integrated space debris protection

Schubert, Martin (Corresponding author)
Dafnis, Athanasios
Bayesian Damage Characterization Based on Perturbation Model Utilizing Responses at Vibration Nodes

Huang, Tianxiang (Corresponding author)
Schröder, Kai-Uwe
Verfahren zur Einstellung der Deformation eines Sicherheitselements eines Fahrzeugs und ein entsprechendes Sicherheitselement

Bach, Aleksandar
Pasligh, Niels
Schröder, Kai-Uwe
Lyssakow, Pawel
Jafarzadeh Aghdam, Nima
Modified product development process for tailored textiles

Schlesinger, Yanik (Corresponding author)
Lyssakow, Pawel
Stein, Sebastian Andreas
MoonFibre - Fibres from Lunar Regolith

Panajotović, Stefan (Corresponding author)
Meinert, Tobias
Becker, Thilo Alexander Thomas
Romero, Juan Carlos Arañó
Lüking, Alexander
Nonlinear static FE-analysis of smart piezolaminated FGM shells at finite rotations

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger
Schröder, Kai-Uwe
On nonlinear thermo-magneto-electro-elasticity and FE analysis of magneto-electro-elastic structures

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger
Schröder, Kai-Uwe
Impact of thin‐walled square aluminum tubes

Jafarzadeh Aghdam, Nima (Corresponding author)
Tatikonda, Uday Bhaskara Chary
Bühring, Jannik
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Numerical investigations about the use of lattice structures in energy absorbing systems

Bühring, Jannik (Corresponding author)
Jafarzadeh Aghdam, Nima
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Energy absorption of re-entrant auxetic structures : a parametric study

Mekala, Narasimha Rao (Corresponding author)
Bühring, Jannik
Jafarzadeh Aghdam, Nima
Schröder, Kai-Uwe
Investigation of the impact conditions of a mechanical shock test facility

Zeis, Christopher (Corresponding author)
Dück, Andreas
Schröder, Kai-Uwe
Failure load prediction of adhesively bonded single lap joints by using various FEM techniques

Sadeghi, Mohammadzamaan (Corresponding author)
Gabener, A.
Zimmermann, Jannik
Savarana, K.
Weiland, Josef
Reisgen, Uwe
Schröder, Kai-Uwe
Development of a Degradation Model of Epoxy Adhesive due to Radiation in Space Environment

Zimmermann, Jannik (Corresponding author)
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Towards a coupled structural and economical design procedure of unstiffened isotropic shell structures

Lyssakow, Pawel (Corresponding author)
Krause, Max
Friedrich, Linus Michael
Schröder, Kai-Uwe
Analysis of back-face strain measurement for adhesively bonded single lap joints using strain gauge, digital image correlation and finite element method

Weiland, Josef (Corresponding author)
Sadeghi, Mohammadzamaan
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Comparative strength analysis of adhesively bonded single and double lap joints under the influence of geometry of bonded area

Weiland, Josef (Corresponding author)
Sadeghi, Mohammadzamaan
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Experimental Investigation of Nonlinear Vibration of a Thin Rectangular Plate

Abdulkerim, Sohayb (Corresponding author)
Dafnis, Athanasios Dimitri
Riemerdes, Hans-G.
Towards an analytical and numerical design approach for Tailored Textiles

Lyssakow, Pawel (Corresponding author)
Stein, Sebastian Andreas
Huber, Philipp Maria
Schlesinger, Yanick
Schröder, Kai-Uwe
Towards an experimental & numerical design approach for Tailored Textiles

Lyssakow, Pawel (Corresponding author)
Schröder, Kai-Uwe
Numerical static and dynamic analyses of improved equivalent models for corrugated sandwich structures

Yang, Jin-Shui
Li, De-Lin
Ma, Li (Corresponding author)
Zhang, Shun-Qi
Schröder, Kai-Uwe
Schmidt, Rüdiger
AMS-100: The next generation magnetic spectrometer in space - An international science platform for physics and astrophysics at Lagrange point 2

Schael, Stefan (Corresponding author)
Atanasyan, Alexander
Berdugo, J.
Bretz, Thomas
Czupalla, Markus
Dachwald, Bernd
von Doetinchem, P.
Duranti, M.
Gast, Henning (Corresponding author)
Karpinski, Waclaw
Kirn, Thomas
Lübelsmeyer, Klaus
Maña, C.
Marrocchesi, P. S.
Mertsch, Philipp
Moskalenko, I. V.
Schervan, Thomas A.
Schluse, Michael
Schröder, Kai-Uwe
Schultz von Dratzig, Arndt
Senatore, C.
Spies, L.
Wakely, S. P.
Wlochal, Michael
Uglietti, D.
Zimmermann, Jannik
Failure prediction of adhesively bonded joints by means of finite element method

Sadeghi, Mohammadzamaan (Corresponding author)
Zimmermann, Jannik
Weiland, Josef
Gabener, André
Reisgen, Uwe
Schröder, Kai-Uwe
A strain-based damage detection approach in adhesively bonded single lap joints

Sadeghi, Mohammadzamaan (Corresponding author)
Weiland, Josef
Janetzko-Preisler, Andreas
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
Exposure of structural epoxy adhesive to combination of tensile stress and γ-radiation

Zimmermann, Jannik (Corresponding author)
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Design guidelines for load introduction points at the boundaries of sandwich panels

Richert, Philip Bastian (Corresponding author)
Dafnis, Athanasios
Schröder, Kai-Uwe
The effect of γ-radiation on the mechanical properties of structural adhesive

Zimmermann, Jannik (Corresponding author)
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Faseroptische Schadensüberwachung von GFK-Blattfedern mittels struktureller Schadensindikatoren

Janetzko-Preisler, Andreas (Corresponding author)
Wolf-Monheim, Friedrich
Dafnis, Athanasios
Schröder, Kai-Uwe
van der Jagt, Pim
David, Wolfgang
Zandbergen, Paul
Disturbance rejection control with H∞ optimized observer for vibration suppression of piezoelectric smart structures

Zhang, Xiao-Yu
Zhang, Shun-Qi (Corresponding author)
Wang, Zhan-Xi
Qin, Xian-Sheng
Wang, Run-Xiao
Schmidt, Rüdiger
Application of Kalman filter based neutral axis tracking for crack length quantification in beam structures

Soman, Rohan N. (First author)
Schagerl, Martin
Kralovec, Christoph
Schröder, Kai-Uwe
Janetzko-Preisler, Andreas (Corresponding author)
Ostachowicz, Wieslaw
Cost Calculation for a multifunctional Space Interface

Meinert, Tobias (Corresponding author)
Räcker, Tobias
Zimmermann, Jannik
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
A review on modeling techniques of piezoelectric integrated plates and shells

Zhang, Shun-Qi (Corresponding author)
Zhao, Guo-Zhong
Mekala, Narasimha Rao
Schmidt, Rüdiger
Yu, Ying-Jie
Extended Joint Fixity Effects Study on a Small Box Wing Aircraft

Nuño, Miguel (First author)
Schröder, Kai-Uwe (Corresponding author)
Moonfibre : verrückt oder Realität?

Meinert, Tobias (Corresponding author)
Lüking, Alexander (Corresponding author)
A Calculation Method for Over-the-Wing Engines within Conceptual Aircraft Design

Nuño, Miguel (First author)
Pereda, Miguel Yael
Dinçer, Eray
Schröder, Kai-Uwe (Corresponding author)
Stumpf, Eike (Corresponding author)
Accurate numerical simulation on the structural response of the VEGA payload fairing using modal coupling approach

Schmidt, Hauke Gerjet (Corresponding author)
Koh, Seong Ryong
Dafnis, Athanasios
Schröder, Kai-Uwe
Schröder, Wolfgang
Damage detection by double-sided ultrasonic assessment in low-velocity impacted CFRP plates

Sadeghi, Mohammadzamaan (Corresponding author)
Nienheysen, Philipp Thomas
Arslan, Süleyman
Dafnis, Athanasios
Silva Marció, Bruno
Schmitt, Robert H.
Schröder, Kai-Uwe
Spring link for wheel suspension of a motor vehicle and method to produce a spring link

Wolf-Monheim, Friedrich
Devices including motorized vehicles and drones

Wolf-Monheim, Friedrich
Wheel carrier for a vehicle suspension

Wolf-Monheim, Friedrich
Vehicle and vehicle axle suspension

Wolf-Monheim, Friedrich
Spring control arm units for wheel suspension devices of motor vehicles

Wolf-Monheim, Friedrich
Spring residual tensioning device

Zandbergen, Nicole
Souschek, Rainer
Zandbergen, Paul
Gerhards, Thomas
Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Girelli Consolaro, Alberto
Method of manufacturing coil springs and apparatus for manufacturing semi-finished products of coil springs

Gerhards, Thomas
Girelli Consolaro, Alberto
Zandbergen, Paul
Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Simon, Marc
Souschek, Rainer
Rear wheel suspension system for motor vehicles

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Wolf-Monheim, Friedrich
Method for controlling an air suspension system of a vehicle chassis and an air suspension system of a vehicle chassis

Wolf-Monheim, Friedrich
Air spring for vehicle chassis

Wolf-Monheim, Friedrich
Thrust bearings for spring devices and shock absorbing devices for vehicle suspensions

Wolf-Monheim, Friedrich
Radträger für ein Fahrzeug

Wolf-Monheim, Friedrich
Achsaufhängung für ein Fahrzeug sowie Fahrzeug

Wolf-Monheim, Friedrich
Federlenkereinheit einer Radaufhängungsvorrichtung eines Kraftfahrzeuges

Wolf-Monheim, Friedrich
Federrestspannungsvorrichtung

Zandbergen, Nicole
Zandbergen, Paul
Souschek, Rainer
Gerhards, Thomas
Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Girelli Consolaro, Alberto
Hinterradaufhängung für Kraftfahrzeuge

Zandbergen, Paul
Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Hinterradaufhängung für Kraftfahrzeuge

Zandbergen, Paul
Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Achsanordnung für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Modelling and Analysis of Piezolaminated Functionally Graded Polymer Composite Structures Reinforced with Graphene Nanoplatelets under Strong Electroelastic Fields

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger
Schröder, Kai-Uwe
Integrated auxiliary frame of vehicle

Frantzen, Michael Johannes
Wolf-Monheim, Friedrich
Method and device for controlling the driving dynamics of vehicle having track groove compensation

Wolf-Monheim, Friedrich
Automobile front-axle

Wolf-Monheim, Friedrich
Multi link rear wheel suspension

Wolf-Monheim, Friedrich
Vehicle suspension member

Wolf-Monheim, Friedrich
Motor vehicle wheel suspension

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Wolf-Monheim, Friedrich
Multi-objective Optimization of Vehicle Dynamics and Vibration Performance using Genetic Algorithms

Wolf-Monheim, Friedrich
Tybislawski, Marius
Zandbergen, Paul
Simple Progression Law in Predicting the Damage Onset and Propagation in Composite Notched Laminates

Meon, Mohd Suhairil Bin (Corresponding author)
Mekala, Narasimha Rao
Schröder, Kai-Uwe (Last author)
In-process integration of fibre optical sensors for structural condition monitoring of braided composite shaft

Bareiro, Oscar (Corresponding author)
Janetzko-Preisler, Andreas
Drichel, Pascal
Ackermann, Philippe
Schröder, Kai-Uwe
Gries, Thomas
Jacobs, Georg
Schmitt, Robert H.
Development and design of multifunctional lightweight structures for satellite applications

Schubert, Martin (Corresponding author)
Pefertto, Sara
Dafnis, Athanasios
Mayer, Dirk
Atzrodt, Heiko
Multifunctional and lightweight load-bearing composite structures for satellites

Schubert, Martin (Corresponding author)
Perfetto, Sara
Dafnis, Athanasios
Atzrodt, Heiko
Mayer, Dirk
A Bayesian Probabilistic Approach for Damage Imaging Utilizing Responses at Vibration Nodes

Huang, Tianxiang (Corresponding author)
Bo, Hao
Schröder, Kai-Uwe
Unknown disturbance estimation for vibration systems using distributed piezoelectric sensors

Wu, Bin-Yi
Qin, Xian-Sheng
Zhang, Shun-Qi (Corresponding author)
Bai, Jing
Xue, Ting
Schmidt, Rüdiger
Small Aircraft Concept for Regional On-Demand Air Mobility

Stumpf, Eike (Corresponding author)
Kreimeier, Michael
Strathoff, Philipp
Lückhof, Jan-Marcus
Schröder, Kai-Uwe
Janser, Frank
A study on vibration of Setar: stringed Persian musical instrument

Pedrammehr, Siamak (Corresponding author)
Jafarzadeh Aghdam, Nima
Pakzad, Sajjad
Ettefagh, Mir Mohammad
Homayoun Sadeghi, Morteza
Static and dynamic FE analysis of piezolaminated composite shells considering electric field nonlinearity under thermo-electro-mechanical loads

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger (Collaboration author)
Schröder, Kai-Uwe (Last author)
Coupling of rigid body dynamics with structural mechanics to include elastic deformations in a real-time capable holistic simulation for digital twins

Krause, Max (Corresponding author)
Schröder, Kai-Uwe
Kaufmann, Dorit
Osterloh, Tobias
Roßmann, Heinz-Jürgen
Forced Vibration Analysis of FG-Graphene Platelet Reinforced Polymer Composite Shells Bonded With Piezoelectric Layers Considering Electroelastic Nonlinearities

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger
Schröder, Kai-Uwe (Last author)
Game-changing space system interface approach with standard potentialand space eco-system impact

Kreise, Joerg (Corresponding author)
Schervan, Thomas A.
Schröder, Kai-Uwe
Meyer, Thomas
Assembly and Qualification of a Modular Satellite Structure

Schervan, Thomas A. (Corresponding author)
Richert, Philip Bastian
Zimmermann, Jannik
Zeis, Christopher
Häming, Anna Magdalena
Dück, Andreas
Schröder, Kai-Uwe
Additively manufactured biodegradable porous magnesium

Li, Y. (Corresponding author)
Zhou, J.
Pavanram, P.
Leeflang, M. A.
Fockaert, L. I.
Pouran, B.
Tümer, N.
Schröder, Kai-Uwe
Mol, J. M. C.
Weinans, H.
Jahr, Holger
Zadpoor, A. A.
Design and Qualification of a Multifunctional Interface for Modular Satellite Systems

Kortmann, Martin (Corresponding author)
Zeis, Christopher
Meinert, Tobias
Dück, Andreas
Schröder, Kai-Uwe
Mixed-mode Fatigue Lifetime Prediction Tool for Adhesively Bonded Joints

Sadeghi, Mohammadzamaan (Corresponding author)
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
The Effect of Space Environment on the Mechanical Properties of Structural Adhesives

Zimmermann, Jannik (Corresponding author)
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
Hybrid Crash Boxes Under Axial Impact

Jafarzadeh Aghdam, Nima (Corresponding author)
Schröder, Kai-Uwe
Modeling of thermo-electro-magneto-mechanical properties of layered magnetostrictive-piezoelectric laminate composites

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger (Collaboration author)
Schröder, Kai-Uwe (Last author)
A baseline-free structural damage indicator based on node displacement of structural mode shapes

Huang, Tianxiang (Corresponding author)
Chaves-Vargas, Mauricio
Yang, Jinshui
Schröder, Kai-Uwe
Mechanical Testing and Analysis of Hybrid Bonded Joints and Load Introduction Elements

Richert, Philip Bastian (Corresponding author)
Zimmermann, Jannik
Schervan, Thomas A.
Dafnis, Athanasios
Schröder, Kai-Uwe
Modal characteristics and damping enhancement of carbon fiber composite auxetic double-arrow corrugated sandwich panels

Ma, Li (Corresponding author)
Chen, Yun-Long
Yang, Jin-Shui (Corresponding author)
Wang, Xin-Tao
Ma, Guo-Lin
Schmidt, Rüdiger
Schröder, Kai-Uwe
Experimental and numerical study on the modal characteristics of hybrid carbon fiber composite foam filled corrugated sandwich cylindrical panels

Yang, Jin-Shui
Ma, Li (Corresponding author)
Schröder, Kai-Uwe
Chen, Yun-Long
Li, Shuang
Wu, Lin-Zhi
Schmidt, Rüdiger
Auslegung dynamisch hochbeanspruchter Kunststoff-Fahrwerkskomponenten

Hopmann, Christian
Zandbergen, Paul
Wolf-Monheim, Friedrich
Italiano, F.
Girelli Consolaro, Alberto
Mainz, D.
David, W.
van der Jagt, P.
Brandt, Pascal
Becker, Fabian (Corresponding author)
Fischer, Kai
Development and Design of Multifunctional Composite Structures for Satellite Applications

Perfetto, Sara (Corresponding author)
Schubert, Martin
Mayer, Dirk
Dafnis, Athanasios
Atzrodt, Heiko
Strukturelle Zustandsüberwachung geflochtener Verbundstrukturen

Bareiro, Oscar (Corresponding author)
Münch, Pia Katharina
Gries, Thomas
Janetzko-Preisler, Andreas
Drichel, Pascal
Ackermann, Philippe
Schmitt, Robert H.
Intrinsic Damage Assessment of Beam Structures Based On Structural Damage Indicators

Janetzko-Preisler, Andreas (Corresponding author)
Schröder, Kai-Uwe
Schagerl, Martin
The applicability of J-integral approach in the determination of mixed-mode fracture energy in a ductile adhesive

Sadeghi, Mohammadzamaan (Corresponding author)
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
Generalized-Disturbance Rejection Control for Vibration Suppression of Piezoelectric Laminated Flexible Structures

Zhang, Xiao-Yu
Wang, Run-Xiao
Zhang, Shun-Qi (Corresponding author)
Wang, Zhan-Xi
Qin, Xian-Sheng
Schmidt, Rüdiger
iBOSS Modular Plug & Play - Standardized Building Block Solutions for Future Space Systems Enhancing Capabilities and Flexibility, Design, Architecture and Operations

Schervan, Thomas A. (First author)
Kortmann, Martin (Collaboration author)
Schröder, Kai-Uwe (Collaboration author)
Kreisel, Jörg (Corresponding author)
A control arm of a suspension

Wolf-Monheim, Friedrich
Fahrzeugkomponente mit einem Anbindungsbereich zur elastischen Anbindung einer anderen Komponente

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Nicole
Zandbergen, Paul
Air suspension unit for motor vehicles

Wolf-Monheim, Friedrich
Wheel suspension unit consisting of two parts

Zandbergen, Nicole
Souschek, Rainer
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Vehicle component having an attachment area for resiliently attaching another component

Hintzen, Ralf
Gerhards, Thomas
Mainz, Daniel
Zandbergen, Paul
Girelli Consolaro, Alberto
Souschek, Rainer
Zandbergen, Nicole
Wolf-Monheim, Friedrich
Rear wheel suspension for motor vehicles

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Wolf-Monheim, Friedrich
Trailing arm for wheel suspension and wheel suspension with trailing arm

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Zandbergen, Nicole
Girelli Consolaro, Alberto
Wheel suspension unit for motor vehicles

Zandbergen, Nicole
Souschek, Rainer
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Girelli Consolaro, Alberto
Wolf-Monheim, Friedrich
Shock absorber assembly for motor vehicles

Wolf-Monheim, Friedrich
Subframe mountings for mounting subframes to the body of a motor vehicle and motor vehicles with subframe mountings

Wolf-Monheim, Friedrich
Spring configuration components for motor vehicles

Wolf-Monheim, Friedrich
Vehicle spring assembly

Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Nicole
Zandbergen, Paul
Hintzen, Ralf
Drotar, Timothy
Wheel suspension trailing arm and method making same

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Zandbergen, Nicole
Girelli Consolaro, Alberto
Vehicle spring assembly

Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Nicole
Zandbergen, Paul
Hintzen, Ralf
Drotar, Timothy
Radaufhängungseinheit für ein Kraftfahrzeug sowie Verfahren zur Herstellung der Radaufhängungseinheit

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Nicole
Zandbergen, Paul
Radaufhängung mit quer verlaufender Blattfeder

Wolf-Monheim, Friedrich
Luftfedereinheit für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Luftfedereinheit für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Zweiteilige Radaufhängungseinheit

Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Paul
Zandbergen, Nicole
Souschek, Rainer
Girelli Consolaro, Alberto
Gerhards, Thomas
Zweiteilige Radaufhängungseinheit

Mainz, Daniel
Zandbergen, Nicole
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Souschek, Rainer
Girelli Consolaro, Alberto
Gerhards, Thomas
Aufhängungssystem

Wolf-Monheim, Friedrich
Aufhängungssystem

Wolf-Monheim, Friedrich
Hinterradaufhängung für Kraftfahrzeuge

Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Drotar, Timothy
Wolf-Monheim, Friedrich
Hinterradaufhängung für Kraftfahrzeuge

Hintzen, Ralf
Mainz, Daniel
Zandbergen, Paul
Drotar, Timothy
Wolf-Monheim, Friedrich
Längslenker für eine Radaufhängung sowie Radaufhängung mit Längslenker

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Nicole
Zandbergen, Paul
Radaufhängungseinheit für ein Kraftfahrzeug

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Nicole
Zandbergen, Paul
Radaufhängungseinheit für ein Kraftfahrzeug

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Nicole
Zandbergen, Paul
Stoßdämpfer-Baugruppe für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Stützlager für eine Feder- und Dämpfungsvorrichtung einer Radaufhängung eines Fahrzeugs

Wolf-Monheim, Friedrich
Kraftfahrzeug mit Hilfsrahmen und wenigstens einem Hilfsrahmenlager

Wolf-Monheim, Friedrich
Federanordnung für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Federanordnung für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Querlenker für eine Radaufhängung eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Querlenker für eine Radaufhängung eines lenkbaren Rades eines Kraftfahrzeugs

Wolf-Monheim, Friedrich
Hilfsrahmen für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Hilfsrahmen für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Querlenker für eine Radaufhängung eines Kraftfahrzeugs

Mainz, Daniel
Zandbergen, Nicole
Zandbergen, Paul
Wolf-Monheim, Friedrich
Drotar, Timothy
Hintzen, Ralf
Querlenker für eine Radaufhängung eines Kraftfahrzeugs

Mainz, Daniel
Zandbergen, Nicole
Zandbergen, Paul
Wolf-Monheim, Friedrich
Drotar, Timothy
Hintzen, Ralf
Federanordnung für ein Kraftfahrzeug

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Paul
Zandbergen, Nicole
Federanordnung für ein Kraftfahrzeug

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Paul
Zandbergen, Nicole
Stoßdämpferhalterung und Kraftfahrzeug

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Nicole
Zandbergen, Paul
Stoßdämpferhalterung und Kraftfahrzeug

Drotar, Timothy
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Nicole
Zandbergen, Paul
Radaufhängung für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Radaufhängung für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Height adjusting device for automobile body

David, Wolfgang
Frantzen, Michael Johannes
Gerhards, Thomas
Hintzen, Ralf
Seemann, Michael
Souschek, Rainer
van der Jagt, Pim
Wolf-Monheim, Friedrich
Air spring and damper unit with height adjustment

Dehmel, Matthias
Frantzen, Michael Johannes
Seemann, Michael
Wolf-Monheim, Friedrich
Height adjustment for vehicles with air spring and vibration damper

Dehmel, Matthias
Frantzen, Michael Johannes
Seemann, Michael
Wolf-Monheim, Friedrich
Individual wheel suspension with automatic camber adaptation

Wolf-Monheim, Friedrich
Stabilizer for vehicle and wheel suspension with stabilizer

Wolf-Monheim, Friedrich
Suspension support bearing support, suspension support and motor vehicles

Wolf-Monheim, Friedrich
Torsion beam axle for motor vehicle

Wolf-Monheim, Friedrich
Spring vibration damper with helical spring element and rubber buffer element

Wolf-Monheim, Friedrich
Motor vehicle steering device and the method for detecting steering torque

Wolf-Monheim, Friedrich
Spring arm and making method thereof

Wolf-Monheim, Friedrich
Vorrichtung zur Höhenverstellung eines Fahrzeugaufbaus

David, Wolfgang
Frantzen, Michael Johannes
Hintzen, Ralf
Gerhards, Thomas
Seemann, Michael
Souschek, Rainer
Wolf-Monheim, Friedrich
van der Jagt, Pim
Vorrichtung zur Höhenverstellung eines Fahrzeugaufbaus

David, Wolfgang
Frantzen, Michael Johannes
Gerhards, Thomas
Hintzen, Ralf
Souschek, Rainer
van der Jagt, Pim
Wolf-Monheim, Friedrich
Seemann, Michael
Radaufhängung für ein Fahrzeug

Wolf-Monheim, Friedrich
Feder- und Dämpfungsvorrichtung mit einem Schraubenfederelement und einem Gummifederelement

Wolf-Monheim, Friedrich
Fahrzeugkomponente mit einem Anbindungsbereich zur elastischen Anbindung einer anderen Komponente

Souschek, Rainer
Wolf-Monheim, Friedrich
Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Girelli Consolaro, Alberto
Zandbergen, Nicole
Zandbergen, Paul
Damping device with adjustable spring rate

Wolf-Monheim, Friedrich
Drive wheel having an electric wheel hub motor for motor vehicles and motor vehicle

Wolf-Monheim, Friedrich
Motor vehicle subframe

Wolf-Monheim, Friedrich
Advanced ride simulation framework for ride comfort optimization

Wolf-Monheim, Friedrich
Palandri, J.
Zandbergen, P.
Reff, B.
Composite chassis components

Girelli Consolaro, A.
Zandbergen, N.
Zandbergen, P.
Wolf-Monheim, Friedrich
Italiano, F.
Multifunctional Load Carrying Lightweight Structures for Space Design

Schubert, Martin (Corresponding author)
Perfetto, Sara
Dafnis, Athanasios
Mayer, Dirk (Collaboration author)
Atzrodt, Heiko
Schröder, Kai-Uwe
Einfluss strukturmechanischer Randbedingungen auf das aeroakustische Antwortverhalten der VEGA Nutzlastverkleidung

Schmidt, Hauke Gerjet
Koh, Seong Ryong
Dafnis, Athanasios
Schröder, Kai-Uwe
Schröder, Wolfgang
Postbuckling Responses of the Panels Subjected to Combined Compression and Shear Stresses

Aswini, N. (Corresponding author)
Reimerdes, Hans-Günther
Gupta, N. K.
Design Strategy, Numerical Analysis and Testing of a Modular Satellite Structure

Schervan, Thomas A. (Corresponding author)
Richert, Philip Bastian
Zimmermann, Jannik
Häming, Anna Magdalena
Dafnis, Athanasios
Schröder, Kai-Uwe
Integrative Werkstoff- und Prozesssimulation

Klocke, Fritz
Münstermann, Sebastian
Schröder, Kai-Uwe
Apel, Markus
Binder, Hanns Marvin (Corresponding author)
Butz, Alexander
Döbbeler, Benjamin
Fischersworring-Bunk, Andreas
Prahl, Ulrich
Rüss, Marvin
Numerical analysis of acoustic loads generated by supersonic jets

Koh, Seong Ryong (Corresponding author)
Henze, Andreas
Meinke, Matthias
Schröder, Wolfgang
Schmidt, Hauke Gerjet
Dafnis, Athanasios
Geometrically nonlinear FE analysis of piezoelectric laminated composite structures under strong driving electric field

Zhang, Shun-Qi
Zhao, Guo-Zhong (Corresponding author)
Zhang, Shu-Yang
Schmidt, Rüdiger
Qin, Xian-Sheng
Stress invariant based elastoplastic damage modelling of unidirectional fiber reinforced composites

Mekala, Narasimha Rao (Corresponding author)
Bangaru, Ashish Kumar
Meon, Mohd Suhairil Bin
Schröder, Kai-Uwe (Last author)
Tuning Guideline for a Shock Test Facility for Spacecraft Equipment Qualification

Dück, Andreas (Corresponding author)
Zeis, Christopher
Dafnis, Athanasios
Schröder, Kai-Uwe
Multifunctional Interface for Modular Satellite Systems with Robotic Servicing Capabilities

Kortmann, Martin (Corresponding author)
Meinert, Tobias
Dafnis, Athanasios
Schröder, Kai-Uwe
A Hybrid Damage Detection Method for Composite Pressure Vessel

Huang, Tianxiang (Corresponding author)
Schröder, Kai-Uwe
A Modal-analysis-based NODIS Method for Beam-like Structure and Its Performance under Changing Boundary Conditions

Huang, Tianxiang (Corresponding author)
Schröder, Kai-Uwe
Monitoring of fatigue damages in adhesively bonded joints

Janetzko-Preisler, Andreas (Corresponding author)
Sadeghi, Mohammadzamaan
Schröder, Kai-Uwe
iBOSS Modular Plug & Play - Standardized Building Block Solutions for Future Space Systems Enhancing Capabilities and Flexibility, Design, Architecture and Operations

Schervan, Thomas A. (Corresponding author)
Kortmann, Martin (Collaboration author)
Schröder, Kai-Uwe (Collaboration author)
Kreisel, Jörg (Corresponding author)
Expanding the Weight-Strength-Curves for unstiffened CFRP shell structures

Lyssakow, Pawel
Friedrich, Linus Michael
Schröder, Kai-Uwe
Expanding the Weight-Strength-Curves for unstiffened composite shell structures

Lyssakow, Pawel (Corresponding author)
Schröder, Kai-Uwe
Applicability of J-integral approach in determination of mixed-mode fracture energy in a ductile adhesive

Sadeghi, Mohammadzamaan (Corresponding author)
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
Parametric Studies on The Damage Behaviour of Protruded Single-lap Composite Joints

Meon, Mohd Suhairil Bin (Corresponding author)
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Ein interdisziplinärer Ansatz zur intelligenten FVK Welle

Janetzko-Preisler, Andreas (Corresponding author)
Schröder, Kai-Uwe
Influence of manufacturing defects on modal properties of composite pyramidal truss-like core sandwich cylindrical panels

Yang, Jinshui
Ma, Li (Corresponding author)
Chaves-Vargas, Mauricio
Huang, Tianxiang
Schröder, Kai-Uwe
Schmidt, Rüdiger
Wu, Lin-Zhi
smartSHM

Baltes, Ralph (Corresponding author)
Schröder, Kai-Uwe
Janetzko-Preisler, Andreas
Sizing strategy for stringer and orthogrid stiffened shells under axial compression

Friedrich, Linus Michael (Corresponding author)
Reimerdes, Hans-Günther (Corresponding author)
Schröder, Kai-Uwe (Corresponding author)
Spring link and method for producing it

Wolf-Monheim, Friedrich
Lenker für die Anbindung eines Fahrzeugrads an ein Fahrzeug sowie Fahrzeugradaufhängung

Wolf-Monheim, Friedrich
Dämpfereinheit für ein Federungssystem mit einem semiaktiven Dämpfungsmittel

Wolf-Monheim, Friedrich
Multi-link rear wheel suspension for motor vehicles

Wolf-Monheim, Friedrich
Verfahren zum Betrieb einer Hinterradlenkung sowie Hinterradlenkung für ein Fahrzeug

Wolf-Monheim, Friedrich
Subframe for vehicle

Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Zandbergen, Paul
Subframe for vehicle

Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Zandbergen, Paul
Stabilizer for motor vehicle

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Wheel suspension for motor vehicles

Carlitz, Andreas
Mainz, Daniel
Zandbergen, Paul
Hintzen, Ralf
Drotar, Timothy
Wolf-Monheim, Friedrich
Semi-active stabilizer device of chassis of vehicle

Wolf-Monheim, Friedrich
Independent wheel suspension and vehicle rear axle with the same

Wolf-Monheim, Friedrich
Devices for the steering mechanism of motor vehicles and motor vehicles

Wolf-Monheim, Friedrich
Spring link for vehicle

Wolf-Monheim, Friedrich
Suspension member

Wolf-Monheim, Friedrich
Hilfsrahmen für ein Fahrzeug

Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Zandbergen, Paul
Hilfsrahmen für ein Fahrzeug

Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Zandbergen, Paul
Lenker für eine Radaufhängung eines Fahrzeugs

Wolf-Monheim, Friedrich
Radaufhängung für ein Kraftfahrzeug

Carlitz, Andreas
Drotar, Timothy
Mainz, Daniel
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Radaufhängung für ein Kraftfahrzeug

Carlitz, Andreas
Drotar, Timothy
Mainz, Daniel
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Stabilisator für ein Kraftfahrzeug

Gerhards, Thomas
Hintzen, Ralf
Mainz, Daniel
Wolf-Monheim, Friedrich
Radaufhängung für ein Kraftfahrzeug

Carlitz, Andreas
Drotar, Timothy
Mainz, Daniel
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Radaufhängung für ein Kraftfahrzeug

Carlitz, Andreas
Drotar, Timothy
Mainz, Daniel
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Semi-aktive Stabilisatoranordnung für ein Fahrwerk eines Fahrzeugs

Wolf-Monheim, Friedrich
Semi-aktive Stabilisatoranordnung für ein Fahrwerk eines Fahrzeugs

Wolf-Monheim, Friedrich
Einzelradaufhängung sowie Hinterachse mit Einzelradaufhängungen für ein Fahrzeug

Wolf-Monheim, Friedrich
Einzelradaufhängung sowie Hinterachse mit Einzelradaufhängungen für ein Fahrzeug

Wolf-Monheim, Friedrich
Einzelradaufhängung mit Luftfederelement für eine Fahrzeughinterachse sowie entsprechend ausgestattete Fahrzeughinterachse

Wolf-Monheim, Friedrich
Lenker für eine Radaufhängung eines Fahrzeugs

Wolf-Monheim, Friedrich
Ein Querlenker einer Aufhängung

Wolf-Monheim, Friedrich
Antriebsrad mit Elektro-Radnabenmotor für Kraftfahrzeuge und Kraftfahrzeug

Wolf-Monheim, Friedrich
Lenkung für eine Verbundlenkerachse

Wolf-Monheim, Friedrich
Lenkung für eine Verbundlenkerachse

Wolf-Monheim, Friedrich
Federlenker für ein Fahrzeug

Wolf-Monheim, Friedrich
Federlenker für ein Fahrzeug

Wolf-Monheim, Friedrich
Wheel suspension

Souschek, Rainer
David, Wolfgang
Frantzen, Michael Johannes
Halfmann, Edmund
Wolf-Monheim, Friedrich
Wheel suspension of vehicle

Wolf-Monheim, Friedrich
Device for adjusting height of vehicle body

David, Wolfgang
Frantzen, Michael Johannes
Gerhards, Thomas
Hintzen, Ralf
Seemann, Michael
Souschek, Rainer
van der Jagt, Pim
Wolf-Monheim, Friedrich
Wheel suspension for vehicle

Wolf-Monheim, Friedrich
Wheel suspension with transverse force compensation for motor-driven vehicle

Wolf-Monheim, Friedrich
Verbundlenkerachse für Fahrzeuge

Wolf-Monheim, Friedrich
Dämpfereinheit für ein Federungssystem mit einem semiaktiven Dämpfungsmittel

Wolf-Monheim, Friedrich
Wheel suspension system for a vehicle

Wolf-Monheim, Friedrich
Vehicle wheel suspensions

Hintzen, Ralf
Wolf-Monheim, Friedrich
Lightweight Multidisciplinary Optimization for Vehicle Part Design

Chen, X.
Italiano, F.
Wolf-Monheim, Friedrich
Mainz, D.
Advanced Ride Simulation Framework for Driving Comfort Optimization

Wolf-Monheim, Friedrich
Palandri, Jacopo
Zandbergen, Paul
Reff, Björn
Validation of CFD Airdrop Simulations in the Vortical Wake of an Aircraft with Open Ramp

Geisbauer, Sven (Corresponding author)
Schmidt, Hauke Gerjet
A multiphysics finite element model for functionally graded magneto-electro-elastic structures

Mekala, Narasimha Rao (Corresponding author)
Schmidt, Rüdiger
Schröder, Kai-Uwe
Geometrically nonlinear and coupled thermopiezomechanical modeling and analysis of smart FGM plates and shells

Schmidt, Rüdiger
Mekala, Narasimha Rao
Schröder, Kai-Uwe
Beitrag zur physikalisch basierten Modellierung und gezielten Anwendung von Energiedissipation in Leichtbaustrukturen

Chaves-Vargas, Mauricio (Corresponding author)
Schröder, Kai-Uwe
Numerical Prediction of Bearing Strength on Composite Bolted Joint Using Three Dimensional Puck Failure Criteria

Meon, Mohd Suhairil Bin (Corresponding author)
Schröder, Kai-Uwe
Mekala, Narasimha Rao
Tragstrukturkonzepte zur gekoppelten Vorauslegung generischer Faserverbundflügel

Kengmogne Tchakam, Jules André
Cellulose Aerogel Fibers Tested on a REXUS 18 Rocket - The ACTOR Project

Schulz, Björn (Corresponding author)
Meinert, Tobias
Bierbuesse, David
Busen, Michel
Körtzinger, Nina
Stankowski, Michael
Seide, Gunnar
A baseline-free damage detection method based on node displacement in mode shape

Huang, Tianxiang (Corresponding author)
Chaves-Vargas, Mauricio
Yang, Jinshui
Schröder, Kai-Uwe
Investigation in the Mechanical Behavior of Low-Velocity Impacted CFRP Plates Under Different Boundary Conditions

Arslan, Süleyman (Corresponding author)
Sadeghi, Mohammadzamaan
Dafnis, Athanasios
Schröder, Kai-Uwe
Towards a coupled structural and economical assessment of shell structures

Lyssakow, Pawel (Corresponding author)
Schröder, Kai-Uwe
Validation of a numerical model based on stacked-shell approach for Bird-strike using non-destructive tests (NDT)

Dafnis, Athanasios
Sadeghi, Mohammadzamaan (Corresponding author)
Siebert, Thorsten
Anghileri, Marco
Milanese, Andrea
Bassi, Sergio Marco
Discussion on fracture characterization of adhesively bonded joints with varying adhesive thickness - Experimental and Numerical study

Sadeghi, Mohammadzamaan (Corresponding author)
Gabener, André
Schröder, Kai-Uwe
ParaFE - Parametrische FE-Modelle für Schalenstrukturen zur Verifizierung analytischer Methoden

Krause, Max (Corresponding author)
Friedrich, Linus Michael
Schröder, Kai-Uwe
Methodik zur Auslegung von Klebverbindungen mit variabler Klebschichtdicke

Gabener, André
Nonlinear finite element modeling and analysis of coupled multi-physics smart composite structures

Rao, Mekala Narashimha
Towards robust design concepts for shell structures of space launch vehicles

Friedrich, Linus Michael
Minimum stiffness criteria for ring frame stiffeners of space launch vehicles

Friedrich, Linus Michael (Corresponding author)
Schröder, Kai-Uwe
On the structural design of imperfection sensitive laminated composite shell structures subjected to axial compression

Friedrich, Linus Michael (Corresponding author)
Lyssakow, Pawel (Corresponding author)
Perce, Garth (Corresponding author)
Ruess, Martin (Corresponding author)
Bisgani, Chiara (Corresponding author)
Schröder, Kai-Uwe (Corresponding author)
Hybrid lightweight composite pyramidal truss sandwich panels with high damping and stiffness efficiency

Yang, Jin-Shui
Ma, Li (Corresponding author)
Schmidt, Rüdiger
Qi, Ge
Schröder, Kai-Uwe
Xiong, Jian
Wu, Lin-Zhi
Die Notwendigkeit ganzheitlicher Optimierung im Leichtbau

Schröder, Kai-Uwe (Corresponding author)
Fischer, Kai (Corresponding author)
Emonts, Michael Gustav
Finite element modeling and analysis of piezo-integrated composite structures under large applied electric fields

Mekala, Narasimha Rao (Corresponding author)
Tarun, S.
Schmidt, Rüdiger
Schröder, Kai-Uwe
Efficient and robust shell design of space launcher vehicle structures

Friedrich, Linus (Corresponding author)
Ruess, Martin
Schröder, Kai-Uwe
Selected Aspects of Current Challenges in Composite Product Development for Automotive and Aerospace Industry

Czichon, Steffen (Corresponding author)
Köhnke, Jessica
Janetzko-Preisler, Andreas
Herranen, Henrik
Discrepancy between boundary conditions and load introduction of full-scale built-in and sub-scale experimental shell structures of space launcher vehicles

Friedrich, Linus (Corresponding author)
Schröder, Kai-Uwe
Radaufhängung für ein Fahrzeug

Hintzen, Ralf
Wolf-Monheim, Friedrich
Motor vehicle front end

Wolf-Monheim, Friedrich
Chassis subframe, vehicle and the chassis for vehicle

Wolf-Monheim, Friedrich
Connecting piece, structural component, modularization chassis system, vehicle

Wolf-Monheim, Friedrich
Einzelradaufhängung sowie Hinterachse mit Einzelradaufhängungen für ein Fahrzeug und entsprechend ausgestattetes Fahrzeug

Hintzen, Ralf
Wolf-Monheim, Friedrich
Mainz, Daniel
Zandbergen, Paul
Drotar, Timothy
Kraftfahrzeugfrontbereich

Wolf-Monheim, Friedrich
Schwingungsdämpfer, insbesondere dämpfungseinstellbarer Stoßdämpfer für Kraftfahrzeuge

Wolf-Monheim, Friedrich
Schwingungsdämpfer, insbesondere dämpfungseinstellbarer Stoßdämpfer für Kraftfahrzeuge

Wolf-Monheim, Friedrich
Fahrwerkhilfsrahmen und Fahrwerk

Wolf-Monheim, Friedrich
Fahrwerkhilfsrahmen und Fahrwerk

Wolf-Monheim, Friedrich
Verbindung zwischen zwei Verbindungsbereichen zweier Strukturbauteile eines modularen Fahrwerksystems eines Fahrzeugs

Wolf-Monheim, Friedrich
Verbindung zwischen zwei Verbindungsbereichen zweier Strukturbauteile eines modularen Fahrwerksystems eines Fahrzeugs

Wolf-Monheim, Friedrich
Einzelradaufhängung sowie Hinterachsmodul mit Einzelradaufhängungen für ein Fahrzeug und entsprechend ausgestattetes Fahrzeug

Wolf-Monheim, Friedrich
Einzelradaufhängung sowie Hinterachsmodul mit Einzelradaufhängungen für ein Fahrzeug und entsprechend ausgestattetes Fahrzeug

Wolf-Monheim, Friedrich
Lageranordnung für eine Verbundlenkerachse sowie Verbundlenkerachse

Wolf-Monheim, Friedrich
Fahrzeugbatterie

Wolf-Monheim, Friedrich
Vorrichtung zur Höhenverstellung eines Fahrzeugaufbaus

David, Wolfgang
Frantzen, Michael Johannes
Gerhards, Thomas
Hintzen, Ralf
Seemann, Michael
Souschek, Rainer
van der Jagt, Pim
Wolf-Monheim, Friedrich
Höhenverstellvorrichtung für Fahrzeuge mit Luftfeder und Schwingungsdämpfer

Dehmel, Matthias
Frantzen, Michael Johannes
Seemann, Michael
Wolf-Monheim, Friedrich
Vorrichtung zur Höhenverstellung eines Fahrzeugaufbaus

Wolf-Monheim, Friedrich
Air spring and damper unit with height adjustment

Dehmel, Matthias
Frantzen, Michael Johannes
Seemann, Michael
Wolf-Monheim, Friedrich
Height adjustment for vehicles with air spring and vibration damper

Dehmel, Matthias
Frantzen, Michael Johannes
Seemann, Michael
Wolf-Monheim, Friedrich
Individual wheel suspension with automatic camber adaptation

Wolf-Monheim, Friedrich
Air Suspension Systems - What Advanced Applications May Be Possible?

Wolf-Monheim, Friedrich
CAE-Based Driving Comfort Optimization of Passenger Cars

Drotar, Timothy
Palandri, Jacopo
Wolf-Monheim, Friedrich
Zandbergen, Paul
Reff, Bjoern
Development and Validation of a RANS-based Airdrop Simulation Approach

Geisbauer, Sven
Schmidt, Hauke Gerjet
Development and Validation of a RANS-based Airdrop Simulation Approach

Geisbauer, Sven
Schmidt, Hauke Gerjet
Multi-Fidelity Simulation of Cargo Airdrop: From the Cargo Bay to the Ground

Jann, Thomas
Geisbauer, Sven
Bier, Niko
Krüger, Wolf R.
Schmidt, Hauke Gerjet
Analyse des Absetzens komplexer Fallschirm-Last-Systeme mithilfe der Mehrkörpersimulation

Krüger, Wolf R.
Schmidt, Hauke Gerjet
Entwicklung einer Methode zur strukturellen Vorauslegung von Flugzeugrümpfen aus Faserverbundwerkstoffen

Quatmann, Michael
Multidisciplinary Conceptual and Structural Design of a New Generation of Aircraft Overhead Stowage Compartment

Kralovec, Christoph
Schagerl, Martin
Schröder, Kai-Uwe
Building Block-Based "iBOSS" Approach: Fully Modular Systems with Standard Interface to Enhance Future Satellites

Kortmann, Martin (Corresponding author)
Dafnis, Athanasios
Schervan, Thomas A.
Schmidt, Hauke Gerjet
Rühl, Steffen
Weise, Jana
Shape control of piezolaminated thin-walled structures using nonlinear piezoelectric actuators

Mekala, Narasimha Rao (Corresponding author)
Sachdeva, Tarun
Schröder, Kai-Uwe
Damage Assessment in Adhesively Bonded Structures by Using SmartSHM

Janetzko-Preisler, Andreas (Corresponding author)
Sadeghi, Mohammadzamaan
Adomeit, André
Schröder, Kai-Uwe
Preliminary design of circumferential frame stiffeners of space launcher vehicles subjected to axial compression

Friedrich, Linus (Corresponding author)
Schröder, Kai-Uwe
Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compression

Friedrich, Linus (Corresponding author)
Loosen, Simon André
Liang, Ke
Ruess, Martin
Bisagni, Chiara
Schröder, Kai-Uwe
Crack diagnosis of metallic profiles based on structural damage indicators

Janetzko-Preisler, Andreas (Corresponding author)
Steenbock, C.
Schröder, Kai-Uwe
Modal parameter identification of a compression-loaded CFRP stiffened plate and correlation with its buckling behaviour

Chaves-Vargas, M. (Corresponding author)
Dafnis, A. D.
Reimerdes, H.-G.
Schröder, Kai-Uwe
Finite rotation FE-simulation and active vibration control of smart composite laminated structures

Mekala, Narasimha Rao (Corresponding author)
Schmidt, R.
Schröder, Kai-Uwe
Geometrically nonlinear static FE-simulation of multilayered magneto-electro-elastic composite structures

Mekala, Narasimha Rao (Corresponding author)
Schmidt, R.
Schröder, Kai-Uwe
Influence of load application on the collapse load of imperfection sensitive shell structures

Friedrich, Linus (Corresponding author)
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Schröder, Kai-Uwe
Advanced sizing strategies for preliminary design of orthotropic grid stiffened shell structures

Friedrich, Linus (Corresponding author)
Reimerdes, Hans-Günther
Schröder, Kai-Uwe
Thermo-Mechanical Concept for a Modular On-Orbit-Serviceable Satellite System

Schervan, Thomas A.
Adomeit, André (Corresponding author)
Dafnis, Athanasios Dimitri (Corresponding author)
Reimerdes, Hans-Günther (Corresponding author)
Comparison of theoretical approaches to account for geometrical imperfections of unstiffened isotropic thin walled cylindrical shell structures under axial compression

Friedrich, Linus (Corresponding author)
Schmid-Fuertes, Theodor-Andres
Schröder, Kai-Uwe
Entwicklung eines crashdeformierbaren Batteriesystems für elektrisch angetriebene Fahrzeuge

Ginsberg, Sven
Strukturdynamisches Verhalten eines Tragflügelmodells in kryogener, transsonischer nicht-idealer Anströmung

Buxel, Christian
Front lamp for motor vehicle

Wolf-Monheim, Friedrich
Supporting base, shock absorbing device and motor vehicle

Wolf-Monheim, Friedrich
Auxiliary frame of vehicle

Wolf-Monheim, Friedrich
Mehrlenker-Hinterradaufhängung

Wolf-Monheim, Friedrich
Verbundlenkerachse für Fahrzeuge

Wolf-Monheim, Friedrich
Kraftfahrzeug-Lenkvorrichtung und Verfahren zum Erfassen eines Lenkmoments

Wolf-Monheim, Friedrich
Scheinwerfer für ein Kraftfahrzeug

Wolf-Monheim, Friedrich
Vorderachse für ein Fahrzeug

Wolf-Monheim, Friedrich
Vorderachse für ein Fahrzeug

Wolf-Monheim, Friedrich
Stützlager für eine Feder- und Dämpfungsvorrichtung für eine Radaufhängung in Kraftfahrzeugen

Wolf-Monheim, Friedrich
Steuerung der Fahrdynamik eines Fahrzeugs mit Spurrillenausgleich

Wolf-Monheim, Friedrich
Hilfsrahmen für ein Fahrzeug

Wolf-Monheim, Friedrich
Hilfsrahmen für ein Fahrzeug

Wolf-Monheim, Friedrich
Radaufhängung eines Fahrzeuges

Wolf-Monheim, Friedrich
Verfahren zur Batterieauswahl für ein elektrisch angetriebenes Fahrzeug

Wolf-Monheim, Friedrich
Vorrichtung zur Höhenverstellung eines Fahrzeugaufbaus

David, Wolfgang
Frantzen, Michael Johannes
Gerhards, Thomas
Hintzen, Ralf
Souschek, Rainer
van der Jagt, Pim
Wolf-Monheim, Friedrich
Seemann, Michael
Radaufhängung für ein Fahrzeug

Wolf-Monheim, Friedrich
Rollbalg-Luftfeder

Wolf-Monheim, Friedrich
CAE-based driving comfort optimization for passenger cars

Wolf-Monheim, Friedrich
Palandri, J.
Zandbergen, P.
Drotar, T.
Design and aeroelastic assessment of a forward-swept wing aircraft

Krüger, Wolf R. (Corresponding author)
Klimmek, Thomas
Liepelt, René
Schmidt, Hauke
Waitz, Stefan
Cumnuantip, Sunpeth
Validierung von Lastabsetzsimulationen im wirbelbehafteten Nahfeld eines Transportflugzeuges mit geöffneter Heckrampe

Geisbauer, Sven
Schmidt, Hauke Gerjet
Title confidential

Geisbauer, Sven
Schmidt, Hauke Gerjet
Validation of Structural Parameters as Damage Indicators for Monitoring Plates in the Post Buckling Regime

Viechtbauer, Christoph (Corresponding author)
Schagerl, Martin
Schröder, Kai-Uwe
On the relations between the collapse mode and the possibility of cracks of axially crushed profiles

Müller, Bernhard
Schagerl, Martin
Schröder, Kai-Uwe
Till, Edwin
Lightweight potential and structural optimization of components made of Steel-FRP-Hybrid

Prechtl, Gerhard
Schagerl, Martin
Schröder, Kai-Uwe
Discussion on Uncertainties in Numerical Analysis of Adhesive Joints with Varying Thickness and Material Properties

Adomeit, André
Dafnis, Athanasios
Development and Breadboard Testing of a Mechanical Coupling Interface for Modular Spacecraft Systems

Kortmann, Martin
Dafnis, Athanasios
Reimerdes, Hans-Günther
On the Damage Diagnosis Based on Structural Analysis Data

Schröder, Kai-Uwe (Corresponding author)
Janetzko-Preisler, Andreas
Viechtbauer, Christoph
Schagerl, Martin
Elastic body impact on sandwich panels at low and intermediate velocity

Kralovec, Christoph (Corresponding author)
Schagerl, Martin
Schröder, Kai-Uwe
Semiactive wheel suspension

Wolf-Monheim, Friedrich
Semiactive Wheel Suspension

Wolf-Monheim, Friedrich
Radaufhängung für ein Fahrzeug

Wolf-Monheim, Friedrich
Radaufhängung für ein Fahrzeug

Wolf-Monheim, Friedrich
Radaufhängung für ein Fahrzeug mit aktiver Radsturzverstellung

Wolf-Monheim, Friedrich
Luftfeder- und Dämpfereinheit mit Höhenverstellung

Dehmel, Matthias
Frantzen, Michael Johannes
Seemann, Michael
Wolf-Monheim, Friedrich
Wheel suspension

Souschek, Rainer
David, Wolfgang
Frantzen, Michael Johannes
Halfmann, Edmund
Wolf-Monheim, Friedrich
Variable Fidelity Loads Process in a Multidisciplinary Aircraft Design Environment

Liepelt, René
Pinho Chiozzotto, Gabriel
Schmidt, Hauke Gerjet
ALLEGRA Design Airspeeds and Preliminary Loads

Schmidt, Hauke Gerjet (Corresponding author)
Klimmek, Thomas (Corresponding author)
Comparison of Imperfection Modelling Approaches for Unstiffened Thin-Walled Cylindrical Shell Structures

Friedrich, Linus Michael
Schmid Fuertes, T. A.
Reimerdes, Hans-Günther
Uncertainties in measurements and data evaluation concerning transonic high Reynolds Number wind tunnel tests

Boucke, Alexander
Buxel, Christian
Ballmann, Josef
Dafnis, Athanasios
An experimental investigation on the effect of strain rate on the behaviour of bare and foam-filled aluminium honeycombs

Alavi Nia, A. (Corresponding author)
Sadeghi, Mohammadzamaan
Structural responses of the ASDMAD wing model under the consideration of actual wind tunnel flow conditions

Buxel, Christian
Dafnis, Athanasios
Reimerdes, Hans-Günther
Boucke, Alexander
Imperfection sensitivity of circular cylindrical shells of varying length subjected to axial compression

Friedrich, Linus Michael
Reimerdes, Hans-Günther
Entwicklung eines modularen und wartbaren Satellitenbaukastens

Adomeit, André
Schervan, Thomas A.
Kortmann, Martin
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Structural Concept and Design for Modular and Serviceable Spacecraft Systems

Adomeit, André
Lakshmanan, Martin
Schervan, Thomas A.
Dafnis, Athanasios
Reimerdes, Hans-Günther
Structural Health Control : a comprehensive concept for observation and assessment of damages applied on a Darrieus wind turbine

Viechtbauer, Christoph
Schagerl, Martin
Schröder, Kai-Uwe
Smart Structural Health Monitoring validated on simple plate under compressive loading

Viechtbauer, Christoph (Corresponding author)
Schagerl, Martin (Corresponding author)
Schröder, Kai-Uwe (Corresponding author)
Prediction of the collapse mode of axially crushed profiles

Müller, Bernhard
Schröder, Kai-Uwe
Schagerl, Martin
Identification and Monitoring of Structural Parameters as Damage Indicators for Plates in the Post-Buckling Regime

Schröder, Kai-Uwe
Viechtbauer, Christoph
Schagerl, Martin
On the Application of the Limit Drawing Ratio to Complex Geometries

Vetr, Martin (Corresponding author)
Schagerl, Martin
Schröder, Kai-Uwe
Chimani, Christian
On the folding of plates which buckle before and beyond the elastic limit

Müller, Bernhard (Corresponding author)
Schagerl, Martin
Schröder, Kai-Uwe
Elastic body impact on sandwich panels at low and intermediate velocity

Kralovec, Christoph
Schagerl, Martin
Schröder, Kai-Uwe
Application of a partitioned field approach to transient aerothermal problems in rocket nozzles

Hosters, Norbert Michael
Klaus, Michael
Behr, Marek
Reimerdes, Hans-Günther
Superelements for a computationally efficient structural analysis of elliptical fuselage sections

Quatmann, M. (Corresponding author)
Aswini, N.
Reimerdes, H.-G.
Gupta, N. K.
Experimental and numerical studies of double-nosed projectile impact on aluminum plates

Iqbal, M. A. (Corresponding author)
Khan, S. H.
Ansari, R.
Gupta, N. K.
A study on axial compression of tubular metallic shells having combined tube-cone geometry

Gupta, P. K. (Corresponding author)
Gupta, Narinder Kumar
From NDT over SHM to SHC : the future for wind turbines

Viechtbauer, Christoph
Schagerl, Martin
Schröder, Kai-Uwe
Method and apparatus for steering wheels

Hintzen, Ralf
Gerhards, Thomas
Wolf-Monheim, Friedrich
Zandbergen, Paul
Wheel suspension frame

van der Jagt, Pim
David, Wolfgang
Frantzen, Michael Johannes
Trefzger, Jochen
Zandbergen, Paul
Dornhege, Jens
Wolf-Monheim, Friedrich
Method and apparatus for steering a double-pivot steering system of a motor vehicle

Hintzen, Ralf
Gerhards, Thomas
Wolf-Monheim, Friedrich
Zandbergen, Paul
Integrierter Hilfsrahmen für Fahrzeuge

Frantzen, Michael Johannes
Wolf-Monheim, Friedrich
Vorrichtung und Verfahren zur Lenkung der Räder einer mittels Achsschenkellenkung lenkbaren Fahrzeugachse

Gerhards, Thomas
Hintzen, Ralf
Wolf-Monheim, Friedrich
Zandbergen, Paul
Radaufhängung mit einem Feder-Dämpferbein

van der Jagt, Pim
David, Wolfgang
Frantzen, Michael Johannes
Zandbergen, Paul
Wolf-Monheim, Friedrich
Dornhege, Jens
Trefzger, Jochen
Radaufhängung für Fahrzeuge

Wolf-Monheim, Friedrich
An Intelligent Building Blocks Concept for On-Orbit-Satellite Servicing

Weise, J.
Brieß, K.
Adomeit, André
Reimerdes, H.-G.
Göller, M.
Dillmann, R.
Modulare Satelliten für On-Orbit-Servicing

Weise, J.
Brieß, K.
Adomeit, André
Reimerdes, H.-G.
Göller, M.
Dillmann, R.
Computationally efficient analysis of the postbuckling behaviour of stiffened fuselage sections

Quatmann, Michael
Reimerdes, Hans-Günther
Optimization of an omega-stringer stiffened cylindrical shell structure

Quatmann, Michael
Nölke, Daniel
Reimerdes, Hans-Günther
Prediction of the crippling load of omega-stringer stiffened composite shells

Quatmann, Michael
Chaves Vargas, Mauricio
Lakshmanan, Martin
Reimerdes, Hans-Günther
Structures for modular and serviceable spacecraft systems

Adomeit, André
Lakshmanan, Martin
Seefeldt, Patric
Reimerdes, Hans-Günther
Weise, Jana
Dornburg, L.
Brieß, K.
Stress concentrations at free edges of shear webs

Kralovec, Christoph
Schagerl, Martin
Schröder, Kai-Uwe
A systematic approach to design crash elements and to validate FE-analyses by combining computational methods with analytical considerations

Müller, Bernhard
Schagerl, Martin
Schröder, Kai-Uwe
Structural Health Control : a comprehensive concept for observation and assessment of damages

Viechtbauer, Christoph
Schröder, Kai-Uwe
Schagerl, Martin
Geometrically exact solution of a buckling column with asymmetric boundary conditions

Prechtl, Gerhard
Schagerl, Martin
Schröder, Kai-Uwe
Experimental and numerical investigations of residual strength after impact of sandwich panels

Klaus, Michael
Reimerdes, Hans-Günther
Gupta, N. K.
Adhesive joints in composite laminates-A combined numerical/experimental estimate of critical energy release rates

Balzani, C.
Wagner, W.
Wilckens, D.
Degenhardt, R.
Büsing, Sebastian
Reimerdes, Hans-Günther
Mechanical spring damper system for vertical and roll motion

David, Wolfgang
Frantzen, Michael Johannes
Wolf-Monheim, Friedrich
Mechanisches Hub- und Wank-Feder-Dämpfersystem

David, Wolfgang
Frantzen, Michael Johannes
Wolf-Monheim, Friedrich
Experimental and Numerical Investigation of the Flow Topology During Airdrop Operations

Geisbauer, Sven
Schade, Niko
Enk, Stephan
Schmidt, Hauke Gerjet
Arnold, Jürgen
Analysis of forced response in a wind tunnel based on Double-Lattice method

Schmidt, Hauke Gerjet
Neumann, Jens
Mai, Holger
Ein Bausteinkonzept für wartungsfreundliche und rekonfigurierbare Satelliten

Weise, J.
Brieß, K.
Adomeit, André
Reimerdes, H.-G.
Göller, M.
Dillmann, R.
Towards Aerothermoelastic Simulations of Supersonic Flow through Nozzles

Hosters, Norbert Michael
Klaus, Michael
Schieffer, G.
Behr, Marek
Reimerdes, H.-G.
Stepwise development, testing, and technology demonstration of a landing system with landing legs

Buchwald, R.
Klaus, Michael
Bolz, J.
Dafnis, A.
Reimerdes, H.-G.
Analysis of forced response in a wind tunnel based on Doublet-Lattice method

Schmidt, Hauke Gerjet
Neumann, Jens
Mai, Holger
Vorentwicklung eines Widerstandssegels zur Vermeidung von Raumfahrtrückständen in niedrigen Erdorbits

Seefeldt, Patric
Reimerdes, Hans-Günther
Dachwald, Bernd
Design and qualification of a winglet with a high speed oscillating active control surface for aeroelastic windtunnel experiments under cryogenic conditions

Buxel, Christian
Dafnis, Athanasios
Reimerdes, Hans-Günther
Aeroelastic windtunnel testing under cryogenic conditions employing a flexible wing including a winglet with in-situ active control surface

Buxel, Christian
Dafnis, Athanasios
Reimerdes, Hans-Günther
Preliminary design of composite fuselage structures using analytical rapid sizing methods

Quatmann, Michael
Reimerdes, Hans-Günther
SFB Transregio 40: Schubdüse

Schröder, W.
Breede, F.
Danowski, C.
Grilli, M.
Hahn, M.
Hosters, Norbert Michael
Klaus, Michael
Kowollik, D.
Genin, C.
Schieffer, G.
Schlösser, J.
Tini, V.
Wallmersperge, T.
Willems, S.
Equations Facilitate Analysis : an Efficient Closed-Form Postbuckling Analysis Method for an Orthotropic Laminated Composite Plate Under Shear Load

Mittelstedt, Christian
Schröder, Kai-Uwe
Erdmann, Henrike
On the influence of material parameters in deep drawing processes of non-axisymmetric parts

Döhler, Sascha
Schröder, Kai-Uwe
Schagerl, Martin
Waltenberger, Thomas
Geometrically Nonlinear Approximate Solution For The Circumferential Buckling Problem in Hat-Stringer-Stiffened Composite Fuselage Panels

Schröder, Kai-Uwe
Mittelstedt, Christian
Postbuckling of imperfect rectangular composite plates under inplane shear closed-form approximate solutions

Mittelstedt, Christian
Erdmann, Henrike
Schröder, Kai-Uwe
Fahrkomfortoptimierung durch den Einsatz vernetzter Luftfedersysteme

Wolf-Monheim, Friedrich
Nonlinear dynamic behaviour of joined lightweight structures

Abdul Karim, Souheib
Die Bestimmung störender antriebsbedingter Lenkmomente an angetriebenen Federbein-Vorderachsen

Frantzen, M.
Wolf-Monheim, Friedrich
David, W.
Querstabilisator zur Verbindung von Federelementen

Wolf-Monheim, Friedrich
FE Projekt 50.0328/2007 Standard-Lastspektrum für CS-23 Flugzeuge

Schmidt, Hauke Gerjet
The effects of foam filling on compressive response of hexagonal cell aluminum honeycombs under axial loading-experimental study

Alavi Nia, A.
Sadeghi, Mohammadzamaan
Local postbuckling of hat-stringer-stiffened composite laminated plates under transverse compression

Mittelstedt, Christian
Schröder, Kai-Uwe
Postbuckling of Composite Airframe Structures : Closed-Form Approximate Solutions

Schröder, Kai-Uwe
Mittelstedt, Christian
Postbuckling of Compressively Loaded Imperfect Composite Plates : Closed-Form Approximate Solutions

Schröder, Kai-Uwe
Mittelstedt, Christian
Dimensioning of orthotropically stiffened CFRP shells of large launch vehicles for load introduction and stability

Rittweger, Andreas
Christianson, Susanne
Öry, Huba
Sandwich structures with textile-reinforced composite foldcores under impact loads

Heimbs, Sebastian
Cichosz, J.
Klaus, Michael
Kilchert, Sebastian
Johnson, Alastair F.
Vielkanaldatenerfassung bei dynamischen Versuchen im kryogenen Windkanal

Büsing, Sebastian
Just, Werner
Modal Parameter Estimation of the HIRENASD Elastic Wing Model under Wind-on Conditions Using Structural Response Data Only

Korsch, H.
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Influence of delaminations in sandwich skins on residual strength after impact simulations

Reimerdes, Hans-Günther
Numerical comparison between different strength after impact test procedures

Klaus, Michael
Reimerdes, Hans-Günther
Numerical investigation of different strength after impact test procedures

Klaus, Michael
Reimerdes, Hans-Günther
The stick-slip joint effect on dynamics behaviour of nonlinear beam

Karim, S. Athanasios
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Stationäre und instationäre Untersuchungen an einem elastischen Flügelmodell mit Winglet im kryogenen Windkanal im Rahmen des ASDMAD-Projektes

Dafnis, Athanasios Dimitri
Buxel, Christian
Kengmogne Tchakam, Jules André
Büsing, Sebastian
Reimerdes, Hans-Günther
Behr, Marek
Chen, Bae-Hong
Reimer, Lars
Boucké, Alexander
Brakhage, Karl-Heinz
Olivier, Herbert
Kordt, Michael
Theurich, Frank
Büscher, A.
Brink-Spalink, Jan
Ballmann, Josef
Structural Idealization of Flexible Generic Wings in Computational Aeroelasticity

Kengmogne Tchakam, Jules André
Reimerdes, Hans-Günther
Influence of delamiations in sandwich skins on residual strength after impact simulations

Klaus, Michael
Reimerdes, Hans-Günther
Entwicklung eines Strukturmodells zur Vorauslegung moderner Flugzeugrümpfe im Nachbeulbereich

Quatmann, Michael
Reimerdes, Hans-Günther
Wang, L.
Modal Parameter Estimation of the HIRENASD Elastic Wing Model under Wind-on Conditions

Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Interlinked Air Suspension Systems : The Influence on Ride Comfort in Testing and Simulation

Wolf-Monheim, Friedrich
Schumacher, Mathias
Frantzen, Michael
Schrüllkamp, Thomas
Loos, Sebastian
Entwicklung eines modularen Standard-Lastspektrums für CS-23 Flugzeuge

Schmidt, Hauke Gerjet
Structural Idealization in Computational Aeroelasticity

Kengmogne Tchakam, Jules André
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Fast and slow changes of the length of gradient trajectories in homogeneous shear turbulence

Schäfer, P.
Gampert, M.
Wang, L.
Peters, N.
Radiation protective structures on the base of a case study for a manned Mars mission

Borggräfe, Andreas
Quatmann, Michael
Nölke, Daniel
Risk Analysis and Damage Prediction of Small Spacecraft

Nölke, D.
Reimerdes, Hans-Günther
Meteoroids and Space Debris

Reimerdes, Hans-Günther
Simulation of the fluid-structure interaction between an elastic panel and an oblique impinging shock

Schieffer, Gero
Engel, Melanie
Reimer, Lars
Behr, Marek
Reimerdes, Hans-Günther
The Impact Performence of Sandwich Structures with Innovative Cellular Metal and Folded Composite Cores

Labeas, George
Johnson, Alastair F.
Mines, Robert
Klaus, Michael
Siviour, Clive
Prediction of delamination in composite structures using a fast design tool

Büsing, Sebastian
Reimerdes, Hans-Günther
Residual Strength Simulations of Sandwich Panels after Impact

Klaus, Michael
Reimerdes, Hans-Günther
Investigation of Failure and Failure Progression in Stiffened Composite Structures

Reimerdes, Hans-Günther
Büsing, Sebastian
Sandwich Structures with folded core: mechanical modeling and impact simulations

Heimbs, Sebastian
Kilchert, Sebastian
Fischer, Sebastian
Klaus, Michael
Baranger, Emmanuel
Sandwich structures with folded core: manufacturing and mechanical behaviour

Fischer, Sebastian
Heimbs, Sebastian
Kilchert, Sebastian
Klaus, Michael
Cluzel, Christoph
Dynamic qualification of the HIRENASD elastic wing model

Korsch, Helge
Reimerdes, Hans-Günther
Die methodische Entwicklung von störmomentreduzierten angetriebenen Vorderachsen

Frantzen, M.
Simon, M.
Gerhards, T.
David, W.
Wolf-Monheim, Friedrich
van der Jagt, P.
Das Potenzial gekoppelter Luftfederungssysteme zur Verbesserung des Fahrkomforts

Wolf-Monheim, Friedrich
Frantzen, M.
Seemann, M.
Wilmes, M.
Modelling, Testing and Correlation of Interlinked Air Suspension Systems for Premium Vehicle Platforms

Wolf-Monheim, Friedrich
Frantzen, Michael
Seemann, Michael
Wilmes, Matthias
Impact of the driving cycle on the NOx and particulate matter exhaust emissions of diesel passenger cars

Zervas, Efthimios
Bikas, George
CO2 control by means of the increased penetration of diesel passenger cars in Finland

Zervas, Efthimios
Poulopoulos, S.
Philippopoulos, C.
Bikas, Georgios
Parametric instability of pressurized propellant tanks

Albus, Jochen
Dieker, Stefan
Öry, Huba
Rittweger, Andreas
Experimental analysis of high Reynolds number aero-structural dynamics in ETW

Ballmann, Josef
Dafnis, Athanasios Dimitri
Korsch, Helge
Buxel, Christian
Reimerdes, Hans-Günther
Brakhage, Karl-Heinz
Olivier, Herbert
Braun, Carsten
Baars, Albert
Boucke, Alexander
Experimental and analytical Investigation of failure and failure progression in composite pull-off specimens

Reimerdes, Hans-Günther
Büsing, Sebastian
Failure and failure progression in the skin-stiffener interface in composite specimens

Reimerdes, Hans-Günther
Büsing, Sebastian
Simulation of postbuckling experiments with a fast design tool

Büsing, Sebastian
Reimerdes, Hans-Günther
Möcker, Torsten
A strip element with interface layer for the prediction of delamination in buckled composite panels

Büsing, Sebastian
Reimerdes, Hans-Günther
Fahrkomfortoptimierung durch den Einsatz vernetzter Luftfederungssysteme

Wolf-Monheim, Friedrich
Seemann, Michael
Schommer, M.
Wilmes, Matthias
Mikrometeoriten und Space Debris

Reimerdes, Hans-Günther
Systematic verification of sandwich model assumptions based on specific finite element formulations

Linke, Markus
Reimerdes, Hans-Günther
Nonregulated pollutants emitted from Euro 3 diesel vehicles as a function of their mileage

Bikas, George
Zervas, Efthimios
Regulated and non-regulated pollutants emitted during the regeneration of a diesel particulate filter

Bikas, George
Zervas, Efthimios
Finite Element for Sandwich Panels Based on Analytical Solution of Constitutive Equations

Linke, Markus
Reimerdes, Hans-Günther
Dynamic response of the HIRENASD elastic wing model under wind-off and wind-on conditions

Dafnis, Athanasios Dimitri
Korsch, Helge
Buxel, Christian
Reimerdes, Hans-Günther
Braun, Carsten
Stability behaviour of cylindrical an conical sandwich shells with flexible core

Zhong, Congying
Reimerdes, Hans-Günther
Finite element for the static and stability analysis of sandwich plates

Linke, Markus
Wohlers, Wolfgang
Reimerdes, Hans-Günther
Numerically Predicted and Expected Experimental Results of the HIRENASD Project

Ballmann, Josef
Braun, Carsten
Dafnis, Athanasios Dimitri
Challenges of Nonsmooth Mechanics in Aero-Structural Dynamics

Ballmann, Josef
Dafnis, Athanasios Dimitri
High Reynolds Number Aerostructrural Dynamics Experiments in the European Transonic Windtunnel

Ballmann, Josef
Dafnis, Athanasios Dimitri
Braun, Carsten
Reimerdes, Hans-Günther
Olivier, Herbert
Versuche zur FEM-Fehlerabschätzung für große Verzerrungen fester Körper

Kerres, Birgit
Rieder, Georg
Herleitung und Validierung der Differentialmatrix für schubweiche rotationssymmetrische Schalen beliebigen Meridians

Klaus, Michael
Reimerdes, Hans-Günther
Bending strength of sandwich panels with different cores after impact

Göttner, W.
Klaus, Michael
Reimerdes, Hans-Günther
Dynamic response of flexible wind tunnel wing models

Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Dynamic qualification of the HIRENASD elastic wing model

Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Modified Cour-Palais

Reimerdes, Hans-Günther
Nölke, Daniel
Schäfer, F.
Postbuckling simulation of curved stiffened composite panels by the use of strip elements

Möcker, Torsten
Reimerdes, Hans-Günther
The HIRENASD Elastic Wing Model and Aeroelastic Test Program at the European Transonic Wind Tunnel (ETW)

Ballmann, Josef
Dafnis, Athanasios Dimitri
Aero-Structural Investigations on a Flexible Strain Wind-Tunnel Wing Model in Subsonic Flow

Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
The Hirenasd Wing Model for the High Reynolds Number Aero-Structural Dynamics Experiments in the European Transonic Wind Tunnel

Ballmann, Josef
Braun, Carsten
Dafnis, Athanasios Dimitri
Kämpchen, Manuel
Korsch, Helge
Reimerdes, Hans-Günther
Design of a Mars Habitat by an Interdisciplinary Working Group : Basic Concepts for Structure and Life Support System

Heidrich, Sebastian
Langen, Britta (Corresponding author)
Gruhlke, Martin C. H. (Corresponding author)
Schervan, Thomas A. (Corresponding author)
Derz, Uwe (Corresponding author)
Nölke, Daniel (Corresponding author)
CO2 changes from the increasing percentage of diesel passenger cars in Norway

Zervas, Efthimios
Bikas, Georgios
Composite Constructions: Industrial Production of Structural Components Made from Fibre/Plastic Composites

Reimerdes, Hans-Günther
Göttner, Wilfried
Gries, Thomas
Henkel, Frank
Schmachtenberg, Ernst
Model Calibration for Spray Penetration and Mixture Formation in a High Pressure Fuel Spray Using a Micro-Genetic Algorithm and Optical Data

Weber, Jost
Spiekermann, Peter
Peters, Norbert
Modelling of ignition mechanisms and pollutant formation in direct-injection diesel engines with multiple injections

Hasse, Christian (Corresponding author)
Peters, Norbert
Aero-structural investigations on a flexible straight wind tunnel wing model in subsonic flow

Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Scaling of production, kinematic restoration, and dissipation of the mean flame surface area

Wenzel, Holger
Peters, Norbert
Non-isotropic length scales during the compression stroke of a motored piston engine

Breuer, Stefan
Oberlack, Martin
Peters, Norbert
Industrielle Herstellung von FVK-Strukturbauteilen

Reimerdes, Hans-Günther
Göttner, Wilfried
Gries, Thomas
Henkel, Frank
Schmachtenberg, Ernst
Meyer-Noack, Sven
A standardized interface between orbital debris environment models and damage prediction tools

Nölke, Daniel
Reimerdes, Hans-Günther
Finite element for the static and stability analysis of sandwich plates

Linke, Markus
Wohlers, Wolfgang
Reimerdes, Hans-Günther
Low velocity impact investigation of sandwich panels with different cores

Göttner, Wilfried
Reimerdes, Hans-Günther
Stability behavior of cylindrical and conical sandwich shells with flexible core

Zhong, Congying
Reimerdes, Hans-Günther
Großflächige Mikrostrukturierung optischer Oberflächen

Brecher, Christian
Wenzel, Christian
Wolf-Monheim, Friedrich (Corresponding author)
Large Surface Area Microstructuring of Optical Surfaces

Weck, Manfred
Wenzel, Christian
Wolf-Monheim, Friedrich
Modal Parameter Identification of Elastic Wing Models under Wind-Off and Wind-On Conditions

Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Investigation into the potentially survivable passenger aircraft crashes

Linke, M.
Reimerdes, Hans-Günther
Cabin and passenger loadings during potentially survivable aaircraft crashes

Linke, M.
Reimerdes, Hans-Günther
Energy absorption of metallic cylindrical shells with induced non-axisymmetric folding patterns

Marsolek, J.
Reimerdes, Hans-Günther
Postbuckling simulation of stiffened composite panels

Möcker, Torsten
Reimerdes, Hans-Günther
Mass optimization of double wall protection systems against micrometeoroids and space debris

Reimerdes, Hans-Günther
Wohlers, W.
Air suspension and adaptive damping : Impact on Handling Characteristics of the Smart

Gärtner, A.
Wolf-Monheim, Friedrich
Kallenberger, A.
Luftfederung und Wankdämpfung : Einfluss auf die Fahrdynamik des Smart

Gärtner, Andreas (Corresponding author)
Wolf-Monheim, Friedrich
Kallenberger, Armin
The extension of incompressible flow solvers to the weakly compressible regime

Munz, C. D.
Roller, S.
Klein, R.
Geratz, K. J.
Modeling partially premixed turbulent combustion

Herrmann, M.
Binninger, B.
Peters, N.
Reveillon, J.
Vervisch, L.
Premixed flame front structure in intense turbulence

Shepherd, I. G.
Cheng, R. K.
Plessing, Tobias
Kortschik, Christof
Peters, Norbert
Dynamic aero-structural response of an elastic wing model

Kämpchen, M.
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Britten, G.
Ballmann, J.
Concepts for reduced structural models of airplane wing in aeroelasticity

Jung, W.
Reimerdes, Hans-Günther
Design, qualification and experimental investigation on flexible Wind-Tunnel wing models

Kämpchen, M.
Korsch, Helge
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Aero-structural response of a flexible swept wind tunnel wing model in subsonic flow

Kämpchen, M.
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Analysis of the postbuckling behaviour of stringer stiffened composite panels loaded in axial compression

Möcker, T.
Reimerdes, Hans-Günther
Analytical optimisation of protection Systems

Wohlers, W.
Reimerdes, Hans-Günther
Arching in masonry walls subjected to earthquake motions

Dafnis, Athanasios Dimitri
Kolsch, Holger
Reimerdes, Hans-Günther
Aggregate formation in sooting counterflow diffusion flames

Pels Leusden, C.
Hasse, Christian
Peters, Norbert
Vortex filament with axial core structure variation

Klein, R.
Ting, L.
Entwicklung elastischer Flügelmodelle und experimentelle Untersuchungen im Windkanal sowie Konzepte und Modellierung der Tragstruktur elastischer Flügel

Reimerdes, Hans-Günther
Jung, W.
Kämpchen, M.
Korsch, Helge
On the crashworthiness of railway vehicles- investigation into the undrframe deformation and energy absorption behaviour

Linke, Markus
Schildberg, D.
Zobory, I.
Reimerdes, Hans-Günther
Imperfection sensitivity of an orthotropic spherical shell under external pressure

Öry, Huba
Reimerdes, Hans-Günther
Schmid, T.
Rittweger, Andreas
Gómez García, J.
Untersuchung des Stabilitätsverhaltens von Flugzeugrümpfen mittels einer modifizierten Balkentheorie und der Berücksichtigung der elastischen Bettung durch die Haut

Wohlers, W.
Reimerdes, Hans-Günther
Fitzsimmons, D.
Wilhelmi, J.
Dieker, S.
Optimization of micrometeroid and space debris protection systems

Reimerdes, Hans-Günther
Wohlers, Wolfgang
Kinetic modelling of n-decane combustion and autoignition: Modeling combustion of n-decanem

Bikas, Georgios
Peters, Norbert
Modeling partially premixed turbulent combustion

Herrmann, M.
Chen, M.
Binninger, Bernd
Peters, N.
Favier, V.
Reveillon, J.
Vervisch, L.
Non-linear collapte analysis of a stiffened spherical shell u

Schermann, T.
Reimerdes, Hans-Günther
Schmid, T.
Optimal placement of active elements by use of an analytic effectiveness and a combination of optimization algorithms

Wohlers, Wolfgang
Reimerdes, Hans-G.
Günnewig, Jochen
Compressive properties of continuous fibre reinforced AlZnMG alloys

Jung, W.
Göttner, W.
Reimerdes, Hans-Günther
Neussl, E.
Sahm, Peter R.
Konstruktion und Berechnung von FVK : Einsatz in statischen und kurzzeitdynamisch belasteten Bauteilen

Reimerdes, Hans-Günther
Wöste, Stefan
Aero-structural investigations on highly flexible wind-tunnel wing models

Kämpchen, Manuel
Reimerdes, Hans-Günther
Reparatur von FVK-Strategien und deren praktische Umsetzung

Reimerdes, Hans-Günther
Wallentowitz, Henning
Michaeli, Walter
Klocke, F.
Eversheim, Walter
Optimization of micrometeroid and space Derbis protection systems

Reimerdes, Hans-Günther
Wohlers, W.
Konstruktion und Berechnung von FVK-Einsatz in statisch und kurzzeitdynamisch belasteten Bauteilen Industrielle Anwendung der Faserverbundtechnik IV

Reimerdes, Hans-Günther
Wöste, S.
Michaeli, Walter
Aero-Structural investigation on highly flexible wind-tunnel wing models

Kämpchen, M.
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Imperfection sensitivity of an orthotropic spherical shell under external pressure

Reimerdes, Hans-Günther
Öry, Huba
Schmid, T.
Direct numerical simulation and modeling of kinematic restoration, dissipation and gas expansion effects of premixed flames in homogeneous turbulence

Wenzel, Holger
Peters, Norbert
A multiblock unilateral concept for passive control of prestressed bridges

Stavroulakis, G. E.
Michalopoulos, A.
Panagiotopoulos, P. D.
Zacharenakis, E.
Reduction and long time behaviour of homogeneous turbulence under spatially constant mean-velocity gradient

Oberlack, M.
Barakat, A.
Design and qualification concepts for flexible wind tunnel wing models

Kämpchen, M.
Jung, W.
Dafnis, A.
Reimerdes, Hans-Günther
A higher-order theory for stability analysis of cylindrical and conical sandwich shell with flexible cores

Zhong, C.
Reimerdes, Hans-Günther
Optimization of the effectiveness of piezoceramic actuators by optimizing the placement of the active elements

Wohlers, W.
Reimerdes, Hans-Günther
Grünnewig, J.
Rake, H.
Design and oualification concepts for flexible wind tunnel models

Kämpchen, M.
Jung, W.
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Stabilitätsverhalten des ESC-LH2-Tanks der Ariane 5

Schmid, T.
Reimerdes, Hans-Günther
Schermann, T.
Dynamische Untersuchungen zur Standsicherheit von Mauerwerkswänden

Hilpert, H.-J.
Dafnis, Athanasios Dimitri
Reimerdes, Hans-Günther
Kolsch, H.
Extension of finite volume compressible flow solvers to multi-dimensional, variable density zero Mach number flows

Schneider, T.
Botta, N.
Geratz, K. J.
Klein, R.
Symmetries of the Navier-Stokes equations and their implications for subgrid-models in large-eddy simulation of turbulence

Oberlack, M.
Modal modeling and state-feedback control of active vibration systems

Hornung, T.
Reimerdes, H. G.
Wohlers, W.
Gunnewig, J.
Transient elastodynamics around cracks including contact and friction

Stavroulakis, G. E.
Antes, H.
Panagiotopoulos, P. D.
Symmetries, invariance and scaling-laws in inhomogeneous turbulent shear flows

Oberlack, Martin
Similarity in non-rotating and rotating turbulent pipe flows

Oberlack, Martin
Modal modelling and state-Feedback control of active vibration systems

Reimerdes, Hans-Günther
Wohlers, W.
Hornung, T.
Günnewig, J.
Ein Beitrag zur Untersuchung mit idealisierten Tragflügeln

Jung, W.
Reimerdes, H.-G.
Auslegung elastischer Windkanalflügelmodelle zur Validierung aeroelastischer Berechnungen

Dafnis, A.
Jung, Wolfgang
Reimerdes, Hans-Günther
On debonding and delamination effects in adhesively bonded cracks on fractal type

Theocaris, Pericles S.
Panagiotopoulos, P. D.
Panagouli, O. K.
Mistakidis, E. S.
Produktionstechnik für Bauteile aus nichtmetallischen Faserverbundwerkstoffen. T. 3: Reparatur von Faserverbund-Strukturen

Eversheim, Walter
Höcker, Hartwig
Klocke, Fritz
Michaeli, Walter
Reimerdes, Hans-Günther
Wallentowitz, Henning
Wulfhorst, Burkhard
Goetz, F.
Grun, G.
Hintersteiner, R.
Moll, Klaus-Uwe
Münker, M.
Pelzer, W.
Würtz, C.
Determination of the energy absorption of cylindrical shells under axial loadling by analysis of the dynamic buckling and folding process

Gómez García, J.
Marsolek, J.
Reimerdes, Hans-Günther
A higher order theory of the non-linear analysis of thick sandwich beams

Reimerdes, Hans-Günther
Schermann, T.
Modelling and Control of Adaptive Mechanical Structures : Proceedings of the Euromech 373 Colloquium, Otto von Guericke University of Magdeburg, 11.-13.3.1998

Hornung, T. (Editor)
Reimerdes, Hans-Günther (Editor)
Günnewig, J. (Editor)
A capturing : tracking hybrid scheme for deflagration discontinuities

Smiljanovski, V.
Moser, V.
Klein, R.
Methodik zur analytischen Beschreibung eines Schwingungssystems mit integrierten aktiven Elementen

Hornung, T.
Reimerdes, Hans-Günther
Günnewig, J.
A methodology for analysis of vibration systems with integrated active elements

Hornung, T.
Reimerdes, Hans-Günther
Stress distributon in repaired composite plates

Reimerdes, Hans-Günther
Goetz, F.
Dynamic buckling of cylindrical shells under impulsive axial loading

Gómez-Garcóa, J.
Marsolek, Jens Stefan
Reimerdes, Hans-Günther
Spannungszustände beim Tiefziehverfahren nach der Spinforming-Methode

Jung, W.
Produktionstechnik für Bauteile aus nichtmetallischen Faserverbundwerkstoffen. Teil 1: Werkstoffe und Simulation

Michaeli, Walter
Reimerdes, Hans-Günther
Wallentowitz, Henning
Weck, Manfred
Wulfhorst, Burkhard
Lehmann, B.
Moll, Klaus-Uwe
Patberg, Lothar
Wildenhagen, M.
Wöste, S.
Akustische Belastung eines Weltraumexperiments in der Ladebucht des Space Shuttle

Albus, Jochen
Spannungen in reparierten Faserverbundstrukturen

Reimerdes, H.-G.
Goetz, F.
Detailed kinetic reaction mechanism for ignition and oxidation of α-methylnaphthalene

Pitsch, Heinz
Stress and stability analysis of shells with elliptical cross-section

Albus, J.
Miermeister, M.
Friese, H.
Ory, H.
Line Raman, Rayleigh, and laser-induced predissociation fluorescence technique for combustion with a tunable KrF excimer laser

Mansour, Mohy
Chen, Yung-Cheng
Solvability theory for a class of hemivariational inequalities involving copositive plus matrices Applications in robotics

Goeleven, D.
Stavroulakis, G. E.
Panagiotopoulos, P. D.
A back-propagation based neural network approach for modelling semi-rigid steel structure connections

Stavroulakis, G. E.
Abdalla, K. M.
Panagiotopoulos, P. D.
Asymptotic vorticity structure and numerical simulation of slender vortex filaments

Klein, Rupert
Knio, Omar M.
Renormalization for reaction-front propagation in a fully developed turbulent shear flow

Fedotov, S. P.
Analysis of Accelerating Detonation Using Large Activation Energy Asymptotics

Klein, R.
On the numerical treatment of the delamination problem in laminated composites under cleavage loading

Mistakidis, E. S.
Baniotopoulos, C. C.
Panagiotopoulos, P. D.
Simplified equations for the interaction of nearly parallel vortex filaments

Klein, Rupert
Majda, Andrew J.
Damodaran, Kumaran
On the numerical treatment of nonconvex energy problems: multilevel decomposition methods for hemivariational inequalities

Panagiotopoulos, P. D.
Tzaferopoulos, M. A.
Comparison of two methods for the solution of a class of nonconvex energy problems using convex minimization algorithms

Tzaferopoulos, M. Ap.
Mistakidis, Euripidis S.
Bisbos, C. D.
Panagiotopoulos, P. D.
The problem of flame propagation in a random velocity field: weak turbulence limit

Fedotov, S. P.
Neural networks for computing in the elastoplastic analysis of structures

Avdelas, A. V.
Panagiotopoulos, P. D.
Kortesis, S.
Reaction front propagation in a turbulent flow

Fedotov, S. P.
Influence of geometric imperfections on the load capacity of orthotropic stiffened and composite shells of revolution with arbitrary meridians and boundary conditions

Rittweger, A.
Schermann, Th.
Reimerdes, H.-G.
Öry, H.
Theoretical and experimental studies of slender vortex filaments

Klein, R.
Ting, L.
Semi-implicit extension of a godunov-type scheme based on low mach number asymptotics I: One-dimensional flow

Klein, R.
Active base isolation of earthquake loaded structures by means of adaptive controlled columns

Hirsch, G. H.
Jozsa, M. R.
Strength tests of flat glass by means of 4-point bending

Blank, K.
Durkop, D.
Durchholz, M.
Grüters, Hugo
Helmich, G.
Senger, W.
A numerical method for a class of hemivariational inequalities

Tzaferopoulos, M. A.
Panagiotopoulos, P. D.
A variational inequality and quadratic programming approach to the separation problem of steel bolted brackets

Baniotopoulos, C. C.
Abdalla, K. M.
Panagiotopoulos, Panagiotis D.
Soot formation in partially premixed diffusion flames at atmospheric pressure

Mauss, F.
Trilken, B.
Breitbach, H.
Peters, N.
Laminar counterflow mixing of acetylene into hot combustion products

Breitbach, H.
Göttgens, J.
Mauss, F.
Pitsch, H.
Peters, N.
Integrale Lichtleit-Meßtechnik zur experimentellen Untersuchung des Verbrennungsablaufs im Dieselmotor

Hötger, M.
Winzer, R.
Antoni, Christian
Curved detonations in explosive gas mixtures with high temperature sensitivity

Klein, R.
Surface erosion by high speed combustion waves

Klein, R.
Breitbach, H.
Geratz, K. J.
Senger, W.
Partially premixed turbulent flame propagation in jet flames

Müller, C. M.
Breitbach, H.
Peters, N.
Modelling of ignition of high pressure sprays

Müller, C. M.
Pitsch, H.
Wan, Y. P.
Peters, N.
The kinetic foundation of thermal flame theory, 1994

Peters, N.
Transient pressure effects in the evolution equation for premixed flame fronts

Keller, D.
Peters, N.
Simplified equations for the interaction of nearly parallel 3-D vortex filaments

Klein, R.
Majda, A. J.
Damodaran, K. K.
Comparison of flamelet models for premixed turbulent combustion

Peters, N.
Asymptotic analyses of stoichiometric and lean hydrogen-air flames

Seshadri, K.
Peters, N.
Williams, F. A.
Convex multilevel decomposition algorithms for non-monotone problems

Stavroulakis, G. E.
Panagiotopoulos, P. D.
Numerical treatment of the sea-bed long underwater cable dynamic interaction problem by an upper bounding algorithm

Avdelas, A. V.
Baniotopoulos, C. C.
Panagiotopoulos, Panagiotis D.
Neural networks for computing in structural analysis : Methods and prospects of applications

Kortesis, S.
Panagiotopoulos, Panagiotis D.
Closure of the two-point correlation Equation as a basis for Reynolds stress models

Oberlack, M.
Peters, N.
Numerical results of simplified dynamic analyses on large imperfect space structures

Öry, Huba
Rittweger, Andreas
Hornung, Ernst
Ludwig, Herbert
Closure of the two-point correlation equation in physical space as a basis for Reynolds stress models

Oberlack, M.
Peters, N.
Closure of the two-point correlation equation as a basis for Reynolds stress models

Oberlack, M.
Peters, N.
Messung zweidimensionaler Geschwindigkeitsfelder am Beispiel einer Motorinnenströmung

Holtorf, J.
Mechanik des Knochenumbaus um Implantate

Senger, W.
Die turbulente Flammenausbreitung im Ottomotor und ihre charakteristischen Längenskalen

Wirth, M.
Laseroptische Flammenstruktur- und Strömungsfeldanalyse im VW-Transparentmotor

Peters, N.
Holtorf, J.
Wirth, M.
Closure of the dissipation tensor equation and the pressure-strain tensor based on the two-point correlation equation

Oberlack, M.
Peters, N.
Experimentelle und numerische Untersuchung des Einflusses der Gasphase auf die Rußbildung

Breitbach, H.
Göttgens, J.
Mauss, F.
Pitch, H.
Peters, N.
Initial acceleration effects on flow evolution around airfoils pitching to high angles of attack

Koochesfahani, M. M.
Smiljanovski, V.
An asymptotic theory for the nonlinear instability of anti-parallel pairs of vortex filaments

Klein, R.
Majda, A. J.
The relation between curvature, rate-state dependence, and detonation velocity

Klein, R.
Stewart, D. S.
Asymptotic equations for the stretching of vortex filaments in a background flow field

Klein, Rupert
Majda, Andrew J.
McLaughlin, Richard M.
Recent advances in control of wind-induced vibrations of guyed masts

Hirsch, Gerhard
A spectral closure for premixed turbulent combustion in the flamelet regime

Peters, N.
A linear complementarity approach to the frictionless gripper problem

Al-Fahed, A. M.
Stavroulakis, G. E.
Panagiotopoulos, Panagiotis D.
The asymptotic structure of premixed methanol-air flames

Yang, B.
Seshadri, K.
Peters, Norbert
The asymptotic structure of hydrogen air diffusion flames

Balakrishnan, G.
Trevino, C.
Mauss, F.
Bauelemente aus Faserverbundwerkstoffen - Konstruktion, Krafteinleitung, Analyse

öry, H.
Menking, M.
Hinz, B.
Strukturmechanische Untersuchung von Knotenstrukturen in Rahmentragwerken der Luft- und Raumfahrt

Öry, H.
Menking, M.
Ermittlung der Luftkraftverteilung am rotierenden Rotorblatt aus gemessenen Strukturreaktionen

Öry, H.
Lindert, H. W.
Elementare Festigkeitslehre im Leichtbau

Dieker, S.
Reimerdes, H.-G.
Reconstruction of spanwise air load distribution on rotorblades from structural flight test data

öry, H.
Lindert, H. W.
Self-stretching of perturbed vortex filaments: II. Structure of solutions

Klein, Rupert
Majda, Andrew J.
On the rigid body displacements and rotations in unilateral contact problems and applications

Stavroulakis, G. E.
Panagiotopoulos, Panagiotis D.
Alfahed, A. M.
Reducing mechanisms

Peters, N.
Introduction à l étude de la combustion

Peters, N.
Kennel, C.
Length scales in laminar and turbulent flames

Peters, N.
Structure of the oxidation layer for stoichiometric and lean methane-air flames

Seshadri, K.
Göttgens, J.
Viscous vortical flows

Ting, L.
Klein, R.
Untersuchung turbulenter Flammenstrukturen im VW-Transparentmotor

Wirth, M.
Peters, N.
Extremal principles, iteration and boundary elements

Rieder, G.
Solutions of the von Kármán-Howarth equation by gradient flux approximations

Oberlack, M.
Peters, N.
Kivotides, D.
Self -stretching of a perturbed vortex filament I: The asymptotic equation for deviation from a straight line

Klein, R.
Madja, A. J.
On the dynamics of weakly curved detonations

Klein, R.
LDA measurements in the premixed V flame stabilized in the wake of a flat plate boundary layer

Trevino, C.
Donnerhack, S.
Peters, N.
Stress and Strain Analyses of Rectangular-Plates for large Deformations .2. Calculation of Fracture Probabilities in Rectangular-Plates under Area Load

Grüters, Hugo
Hackl, Klaus
Willms, Holger
Contribution to the Size Effect on the Strength of Flat Glass

Blank, K.
Grüters, Hugo
Hackl, Klaus
Extremal problems, iteration and BEM for mixed problems

Rieder, G.
Theoretical and experimental investigation of knock induced surface destruction. o.O

Maly, R. R.
Koenig, G.
Klein, R.
Peters, N.
A detailed low-temperature reaction mechanism of n-heptane auto-ignition

Chevalier, C.
Louessard, P.
Müller, U. C.
Warnatz, J.
Two dimensional flame visualization technique in a spark ignition engine, quantitative characterization of flame fronts

Holtorf, J.
Heinze, T.
Der Einfluß turbulenter und laminare Längenskalen auf die turbulente Flammenausbreitung

Wirth, M.
Keller, D.
Peters, N.
A flamelet calculation of benzene formation in co-flowing laminar diffusion flames

Seshadri, K.
Mauss, F.
Peters, N.
A Lagrangian simulation of flamelet extinction and re-ignition in turbulent jet diffusion flames

Mauss, F.
Keller, D.
Peters, N.
The basic structure of lean propane flames

Kennel, C.
Göttgens, J.
Peters, N.
Farfield velocity potential induced by a rapidly decaying vorticity distribution

Klein, R.
Ting, L.
Pressure gradients due to gas expansion in the boundary layer of a condensed fuel

Trevino, C.
Stüttgen, W.
Peters, N.
The inner structure of methane-air flames

Seshadri, K.
Peters, N.
The asymptotic structure of weakly strained stoichiometric methane-air flames

Rogg, B.
Peters, N.
Higher-order effects in boundary layer premixed combustion

Trevino, C.
Stüttgen, W.
Peters, N.
Scaling of buoyant turbulent jet diffusion flames

Peters, N.
Göttgens, J.
The Effect of Winglets on Aircraft Wing Flutter

Butt, Graham Martin
Dafnis, Athanasios Dimitri
SST/HST-Strukturen, SST/HST-Werkstoffe, SST/HST-Bauweisen Entwicklungsrichtungen künftiger Luftfahrttechnologien in den USA : Schlußbericht; Abschlußdatum: November 1987; Contract LFF-8702

Dafnis, Athanasios Dimitri
Öry, Huba

RWTH

Service

Weitere Angebote

Soziale Medien

Facebook