Person

Jannik Zimmermann

M. Sc.
Jannik Zimmermann
Lehrstuhl und Institut für Strukturmechanik und Leichtbau

Address

Building: 1320

Room: 414

Wüllnerstraße 7

52062 Aachen

Contact

WorkPhone
Phone: +49 241 80 96837

Office Hours

by appointment.
 

Research

Recent Research Topic Copyright: SLA
  • Adhesive joining in space sector:

    • Effect of ionizing radiation on the mechanical properties of adhesives

  • Application of High Temperature Super Conducting Magnets in space
  • Topology optimization of cast components for in wind turbine application
 

About Mr. Zimmermann

Jannik Zimmermann studied Mechanical Engineering at the RWTH Aachen University from 2011 to 2016, specializing in aerospace engineering. Mr. Zimmermann has worked as a researcher at the Institute of Structural Mechanics and Lightweight Design since November 2016 and is responsible for the LeKoGussWEA and the AMS-100 project. He has profound knowledge in the fields of adhesive joining, spacecraft design, finite element method and fracture mechanics experiments.

 

Publications

Source Author(s)
[Journal Article]
On the bondline thickness effect in mixed-mode fracture characterisation of an epoxy adhesive
In: The journal of adhesion, 97 (3), 282-304, 2019
[DOI: 10.1080/00218464.2019.1656614]
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Gabener, A.
Schröder, Kai-Uwe
[Contribution to a conference proceedings, Journal Article]
Experimental and FE investigations on the influential parameters in positioning and measurement of strain gauges in adhesively bonded single lap joints
In: Procedia structural integrity, 28, 1590-1600, 2020
[DOI: 10.1016/j.prostr.2020.10.131]
Sadeghi, Mohammed Zamaan
Weiland, Josef
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
[Contribution to a conference proceedings, Journal Article]
Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed mode bending tests
In: Procedia structural integrity, 28, 1601-1620, 2020
[DOI: 10.1016/j.prostr.2020.10.132]
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Saravana, Kumar
Gabener, Andre
Dafnis, Athanasios
Schröder, Kai-Uwe
[Journal Article]
Simplified stiffness analysis for degraded single lap joints in the space sector : Comparative analytical and finite element analysis
In: Proceedings of the Institution of Mechanical Engineers / G, 234 (13), 1956-1966, 2020
[DOI: 10.1177/0954410020947912]
Zimmermann, Jannik
Weiland, Josef
Sadeghi, Mohammed Zamaan
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
[Conference Presentation]
Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed-mode bending tests
In: 1st Virtual Euroepan Conference on Fracture VECF1, 2020
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Kumar, Saravana
Andre, Gabener
Dafnis, Athanasios
Schröder, Kai-Uwe
[Conference Presentation]
Experimental and FE investigations on the influential parameters in positioning and measurement of strain gauges in adhesively bonded single lap joints
In: 1st Virtual Euroepan Conference on Fracture VECF1 2020-06-29 - 2020-07-01, 2020
Sadeghi, Mohammed Zamaan
Weiland, Josef
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
[Abstract, Contribution to a book, Contribution to a conference proceedings]
Stiffness Calculation Scheme for Degraded Single Lap Joints in the Space Sector : Numerical and Analytical Investigation
In: [1st International Conference on Industrial Applications of Adhesives, IAA2020, 2020-03-05 - 2020-03-06, Funchal, Madeira, Portugal], 2020
Zimmermann, Jannik
Weiland, Josef
Sadeghi, Mohammed Zamaan
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
[Contribution to a book, Journal Article]
Damage detection in adhesively bonded single lap joints by using backface strain : proposing a new position for backface strain gauges
In: International journal of adhesion and adhesives, 97 (102494), 2019
[DOI: 10.1016/j.ijadhadh.2019.102494]
Sadeghi, Mohammed Zamaan
Weiland, Josef
Preisler, Andreas
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe
Schröder, Kai-Uwe
[Contribution to a book, Journal Article]
Exposure of structural epoxy adhesive to combination of tensile stress and γ-radiation
In: International journal of adhesion and adhesives, 97, 102496, 2019
[DOI: 10.1016/j.ijadhadh.2019.102496]
Zimmermann, Jannik
Sadeghi, Mohammed Zamaan
Schröder, Kai-Uwe
[Journal Article]
Failure load prediction of adhesively bonded single lap joints by using various FEM techniques
In: International journal of adhesion and adhesives, 97, 102493, 2019
[DOI: 10.1016/j.ijadhadh.2019.102493]
Sadeghi, Mohammed Zamaan
Gabener, A.
Zimmermann, Jannik
Savarana, K.
Weiland, J.
Reisgen, U.
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Development of a Degradation Model of Epoxy Adhesive due to Radiation in Space Environment
In: [70th International Astronautical Congress, IAC 2019, 2019-10-21 - 2019-10-25, Washington D.C., USA], 2019
Zimmermann, Jannik
Sadeghi, Mohammed Zamaan
Schröder, Kai-Uwe
[Journal Article]
AMS-100: The next generation magnetic spectrometer in space - An international science platform for physics and astrophysics at Lagrange point 2
In: Nuclear instruments & methods in physics research / A, 944, 1-13, 2019
[DOI: 10.1016/j.nima.2019.162561]
Schael, Stefan
Atanasyan, Alexander
Berdugo, J.
Bretz, Thomas
Czupalla, Markus
Dachwald, Bernd
von Doetinchem, P.
Duranti, M.
Gast, Henning
Karpinski, Waclaw
Kirn, Thomas
Lübelsmeyer, Klaus
Maña, C.
Marrocchesi, P. S.
Mertsch, Philipp
Moskalenko, I. V.
Schervan, Thomas A.
Schluse, Michael
Schröder, Kai-Uwe
Schultz von Dratzig, Arndt
Senatore, C.
Spies, L.
Wakely, S. P.
Wlochal, Michael
Uglietti, D.
Zimmermann, Jannik
[Contribution to a book, Contribution to a conference proceedings]
Failure prediction of adhesively bonded joints by means of finite element method
In: [5th International Conference on Structural Adhesive Bonding, 2019-07-11 - 2019-07-12, Porto, Portugal], 2019
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Weiland, Josef
Gabener, André
Reisgen, Uwe
Schröder, Kai-Uwe
[Contribution to a book, Contribution to a conference proceedings]
A strain-based damage detection approach in adhesively bonded single lap joints
In: [5th International Conference on Structural Adhesive Bonding, 2019-07-11 - 2019-07-12, Porto, Portugal], 2019
Sadeghi, Mohammed Zamaan
Weiland, Josef
Preisler, Andreas
Zimmermann, Jannik
Reisgen, Uwe
Schröder, Kai-Uwe
Schiebahn, Alexander
[Contribution to a book, Contribution to a conference proceedings]
Exposure of structural epoxy adhesive to combination of tensile stress and γ-radiation
In: [5th International Conference on Structural Adhesive Bonding, AB2019, 2019-07-11 - 2019-07-12, Porto, Portugal], 19 Seiten, 2019
Zimmermann, Jannik
Sadeghi, Mohammed Zamaan
Schröder, Kai-Uwe
[Journal Article]
The effect of γ-radiation on the mechanical properties of structural adhesive
In: International journal of adhesion and adhesives, 93, 102334, 2019
[DOI: 10.1016/j.ijadhadh.2019.01.028]
Zimmermann, Jannik
Sadeghi, Mohammed Zamaan
Schröder, Kai-Uwe
[Conference Presentation]
Cost Calculation for a multifunctional Space Interface
In: Space Cost Engineering Conference Noordwijk 2019-02-11 - 2019-02-12, 2019
Meinert, Tobias
Räcker, Tobias
Zimmermann, Jannik
Sadeghi, Mohammed Zamaan
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Assembly and Qualification of a Modular Satellite Structure
In: [69th International Astronautical Congress, IAC 2018, 2018-10-01 - 2018-10-05, Bremen, Germany], 2018
Schervan, Thomas A.
Richert, Philip Bastian
Zimmermann, Jannik
Zeis, Christopher
Häming, Anna Magdalena
Dück, Andreas
Schröder, Kai-Uwe
[Abstract, Contribution to a book, Contribution to a conference proceedings]
Mixed-mode Fatigue Lifetime Prediction Tool for Adhesively Bonded Joints
In: [Book of Abstracts : 12th European Adhesion Conference and 4th Luso-Brazilian Conference on Adhesion and Adhesives, 2018-09-05 - 2018-09-07, Lisbon, Portugal], 264, 2018
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
[Abstract, Contribution to a book, Contribution to a conference proceedings]
The Effect of Space Environment on the Mechanical Properties of Structural Adhesives
In: [12th European Adhesion Conference, EURADH 2018, 2018-09-05 - 2018-09-07, Lisbon, Portugal], 183-183, 2018
Zimmermann, Jannik
Sadeghi, Mohammed Zamaan
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Mechanical Testing and Analysis of Hybrid Bonded Joints and Load Introduction Elements
In: [European Conference on Spacecraft Structures, Materials and Environmental Testing 2018, ECSSMET 2018, 2018-05-28 - 2018-06-01, Noordwijk, The Netherlands], 2018
Richert, Philip Bastian
Zimmermann, Jannik
Schervan, Thomas A.
Dafnis, Athanasios
Schröder, Kai-Uwe
[Contribution to a conference proceedings, Journal Article]
The applicability of J-integral approach in the determination of mixed-mode fracture energy in a ductile adhesive
In: International journal of adhesion and adhesives, 83, 2-8, 2018
[DOI: 10.1016/j.ijadhadh.2018.02.027]
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Design Strategy, Numerical Analysis and Testing of a Modular Satellite Structure
In: [68th International Astronautical Congress, IAC-17, 2017-09-25 - 2017-09-29, Adelaide, Australia], 2017
Schervan, Thomas A.
Richert, Philip Bastian
Zimmermann, Jannik
Häming, Anna Magdalena
Dafnis, Athanasios
Schröder, Kai-Uwe
[Abstract]
Applicability of J-integral approach in determination of mixed-mode fracture energy in a ductile adhesive
In: 4th International Conference on Structural Adhesive Bonding Porto 2017-07-06 - 2017-07-07, 2017
Sadeghi, Mohammed Zamaan
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
 

Student Thesis

Master Theses:

  • M. Grasberger, Advanced Adhesive Modelling and Stress Evaluation, 2019

Bachelor Theses:

  • S. Backes, Konstruktion und Planung der Versuchseinrichtung zur Durchführung von Belastungs- und Bruchversuchen am Tragflügel der Antares E2, 2019
  • F. Grubert, Experimentelle Bestimmung der mechanischen Eigenschaften eines CFK Profilstabs, 2018
  • J. Smets, Development of a vacuum homogenizer for the degassing of two-component epoxy resin adhesives, 2019
  • T. Olschewsky, Design of an irradiation device for testing adhesives for modular satellites, 2019

Project Theses:

  • S. Kim, M. Zander, Der Weltraumaufzug: Einführung in die Thematik und Bewertung geeigneter Seilmaterialien, 2018