Person

Zamaan Sadeghi

M.Sc.
Mohammadzamaan Sadeghi
Institute of Structural Mechanics and Lightweight Design

Address

Building: 1320

Room: 414

Wüllnerstraße 7

52062 Aachen

Contact

workPhone
Phone: +49 241 80 96837

Office Hours

by appointment.
 

Research

Adhesively Bonded Joint Copyright: SLA

Adhesively Bonded Joint

  • Fracture characterisation of adhesively bonded joints under static and fatigue loading
  • Sizing the adhesively bonded structures (such as patch repairs etc.) under fatigue loading
  • Developing numerical and analytical frameworks for predicting fatigue lifetime in such joints
 
 

About Mr. Sadeghi

Zamaan Sadeghi has been a mechanical engineering in the field of Solid Mechanics after finishing his work at IAU in Iran in 2008. After receiving his Master’s degree, he was offered a teaching post in some higher education institutes in Iran. In March 2011 he moved to England and in October 2012 he started his career as a research collaborator in Labo-Soete in Gent University in Belgium. His work in Labo-Soete would include numerical and analytical investigation on Fretting Fatigue problems. Since September 2014, he started his career in SLA as a research assistant, focussing on adhesively bonded joints.

 
 

Publications

Source Author(s)
[Contribution to a book, Journal Article]
Analysis of back-face strain measurement for adhesively bonded single lap joints using strain gauge, Digital Image Correlation and finite element method
In: International journal of adhesion and adhesives, 97, 102491, 2019
[DOI: 10.1016/j.ijadhadh.2019.102491]
Weiland, Josef
Sadeghi, Mohammedzamaan
Thomalla, Jonas Volker
Schiebahn, Alexander
Schröder, Kai-Uwe
Reisgen, Uwe Kaspar
[Contribution to a book, Journal Article]
Damage detection in adhesively bonded single lap joints by using backface strain : proposing a new position for backface strain gauges
In: International journal of adhesion and adhesives, 97 (102494), 2019
[DOI: 10.1016/j.ijadhadh.2019.102494]
Sadeghi, Mohammedzamaan
Weiland, Josef
Preisler, Andreas
Zimmermann, Jannik
Schiebahn, Alexander
Reisgen, Uwe Kaspar
Schröder, Kai-Uwe
[Contribution to a book, Journal Article]
Exposure of structural epoxy adhesive to combination of tensile stress and γ-radiation
In: International journal of adhesion and adhesives, 97, 102496, 2019
[DOI: 10.1016/j.ijadhadh.2019.102496]
Zimmermann, Jannik
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Journal Article]
Failure load prediction of adhesively bonded single lap joints by using various FEM techniques
In: International journal of adhesion and adhesives, 102493, 2019
[DOI: 10.1016/j.ijadhadh.2019.102493]
Sadeghi, Mohammedzamaan
Gabener, A.
Zimmermann, Jannik
Savarana, K.
Weiland, J.
Reisgen, U.
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Development of a Degradation Model of Epoxy Adhesive due to Radiation in Space Environment
In: [70th International Astronautical Congress, IAC 2019, 2019-10-21 - 2019-10-25, Washington D.C., USA], 2019
Zimmermann, Jannik
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Abstract, Contribution to a book, Contribution to a conference proceedings]
Analysis of back-face strain measurement for adhesively bonded single lap joints using strain gauge, digital image correlation and finite element method
In: [5th International Conference on Structural Adhesive Bonding, AB2019, 2019-07-11 - 2019-07-12, Porto, Portugal], 185, 2019
Weiland, Josef
Sadeghi, Mohammedzamaan
Schiebahn, Alexander
Reisgen, Uwe Kaspar
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Comparative strength analysis of adhesively bonded single and double lap joints under the influence of geometry of bonded area
In: 5th International Conference on Structural Adhesive Bonding Porto 2019-07-11 - 2019-07-12, 129, 2019
Weiland, Josef
Sadeghi, Mohammedzamaan
Schiebahn, Alexander
Reisgen, Uwe Kaspar
Schröder, Kai-Uwe
[Journal Article]
On the bondline thickness effect in mixed-mode fracture characterisation of an epoxy adhesive
In: The journal of adhesion, 1-23, 2019
[DOI: 10.1080/00218464.2019.1656614]
Sadeghi, Mohammedzamaan
Zimmermann, Jannik
Gabener, A.
Schröder, Kai-Uwe
[Contribution to a book, Contribution to a conference proceedings]
Failure prediction of adhesively bonded joints by means of finite element method
In: [5th International Conference on Structural Adhesive Bonding, 2019-07-11 - 2019-07-12, Porto, Portugal], 2019
Sadeghi, Mohammedzamaan
Zimmermann, Jannik
Weiland, Josef
Gabener, André
Reisgen, Uwe Kaspar
Schröder, Kai-Uwe
[Contribution to a book, Contribution to a conference proceedings]
A strain-based damage detection approach in adhesively bonded single lap joints
In: [5th International Conference on Structural Adhesive Bonding, 2019-07-11 - 2019-07-12, Porto, Portugal], 2019
Sadeghi, Mohammedzamaan
Weiland, Josef
Preisler, Andreas
Zimmermann, Jannik
Reisgen, Uwe Kaspar
Schröder, Kai-Uwe
Schiebahn, Alexander
[Contribution to a book, Contribution to a conference proceedings]
Exposure of structural epoxy adhesive to combination of tensile stress and γ-radiation
In: [5th International Conference on Structural Adhesive Bonding, AB2019, 2019-07-11 - 2019-07-12, Porto, Portugal], 2019
Zimmermann, Jannik
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Journal Article]
The effect of γ-radiation on the mechanical properties of structural adhesive
In: International journal of adhesion and adhesives, 93, 102334, 2019
[DOI: 10.1016/j.ijadhadh.2019.01.028]
Zimmermann, Jannik
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Conference Presentation]
Cost Calculation for a multifunctional Space Interface
In: Space Cost Engineering Conference Noordwijk 2019-02-11 - 2019-02-12, 2019
Meinert, Tobias
Räcker, Tobias
Zimmermann, Jannik
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Journal Article]
Damage detection by double-sided ultrasonic assessment in low-velocity impacted CFRP plates
In: Composite structures, 208, 646-655, 2018
[DOI: 10.1016/j.compstruct.2018.10.025]
Sadeghi, Mohammedzamaan
Nienheysen, Philipp Thomas
Arslan, Süleyman
Dafnis, Athanasios
Silva Marció, B.
Schmitt, Robert Heinrich
Schröder, Kai-Uwe
[Journal Article]
A study on vibration of Setar: stringed Persian musical instrument
In: Journal of vibroengineering: JVE, 20 (7), 2952, 2018
[DOI: 10.21595/jve.2018.19505]
Pedrammehr, Siamak
Jafarzadeh Aghdam, Nima
Pakzad, Sajjad
Ettefagh, Mir Mohammad
Homayoun Sadeghi, Morteza
[Abstract, Contribution to a book, Contribution to a conference proceedings]
Mixed-mode Fatigue Lifetime Prediction Tool for Adhesively Bonded Joints
In: [Book of Abstracts : 12th European Adhesion Conference and 4th Luso-Brazilian Conference on Adhesion and Adhesives, 2018-09-05 - 2018-09-07, Lisbon, Portugal], 264, 2018
Sadeghi, Mohammedzamaan
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
[Abstract, Contribution to a book, Contribution to a conference proceedings]
The Effect of Space Environment on the Mechanical Properties of Structural Adhesives
In: [12th European Adhesion Conference, EURADH 2018, 2018-09-05 - 2018-09-07, Lisbon, Portugal], 183-183, 2018
Zimmermann, Jannik
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Contribution to a conference proceedings, Journal Article]
The applicability of J-integral approach in the determination of mixed-mode fracture energy in a ductile adhesive
In: International journal of adhesion and adhesives, 83, 2-8, 2018
[DOI: 10.1016/j.ijadhadh.2018.02.027]
Sadeghi, Mohammedzamaan
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Monitoring of fatigue damages in adhesively bonded joints
In: [6th ECCOMAS Thematic Conference on the Mechanical Response of Composites, COMPOSITES 2017, 2017-09-20 - 2017-09-22, Eindhoven, Netherlands / J.J.C. Remmers and A. Turon (Editors)], 12 Seiten, 2017
Preisler, Andreas
Sadeghi, Mohammedzamaan
Schröder, Kai-Uwe
[Abstract]
Applicability of J-integral approach in determination of mixed-mode fracture energy in a ductile adhesive
In: 4th International Conference on Structural Adhesive Bonding Porto 2017-07-06 - 2017-07-07, 2017
Sadeghi, Zamaan
Zimmermann, Jannik
Gabener, André
Schröder, Kai-Uwe
[Contribution to a book, Contribution to a conference proceedings]
Investigation in the Mechanical Behavior of Low-Velocity Impacted CFRP Plates Under Different Boundary Conditions
In: ECCOMAS Congress 2016 : VII European Congress on Computational Methods in Applied Sciences and Engineering : proceedings / M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) ; European Community on Computational Methods in Applied Sciences. - Volume 1-4, 2786-2802, 2016
Arslan, Süleyman
Sadeghi, Zamaan
Dafnis, Athanasios
Schröder, Kai-Uwe
[Conference Presentation]
Validation of a numerical model based on stacked-shell approach for Bird-strike using non-destructive tests (NDT)
In: 6th EASN International Conference on Innovation in European Aeronautics Research Porto 2016-10-18 - 2016-10-21, 2016
Dafnis, Athanasios
Sadeghi, Mohammedzamaan
Siebert, Thorsten
Anghileri, Marco
Milanese, Andrea
Bassi, Sergio Marco
[Conference Presentation]
Discussion on fracture characterization of adhesively bonded joints with varying adhesive thickness - Experimental and Numerical study
In: 10th International Conference on Advanced Computational Engineering and Experimenting Split 2016-07-03 - 2016-07-06, 2016
Sadeghi, Mohammedzamaan
Gabener, André
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Damage Assessment in Adhesively Bonded Structures by Using SmartSHM
In: [International Workshop on Structural Health Monitoring 2015, IWSHM 2015, 01.09.2015-03.09.2015, Stanford, US], 8 S., 2015
[DOI: 10.12783/SHM2015/27]
Preisler, Andreas
Sadeghi, Zamaan
Adomeit, André
Schröder, Kai-Uwe
[Journal Article]
An experimental investigation on the effect of strain rate on the behaviour of bare and foam-filled aluminium honeycombs
In: Materials and design, 52, 748-756, 2013
[DOI: 10.1016/j.matdes.2013.06.006]
Alavi Nia, A.
Sadeghi, M. Z.
[Journal Article]
The effects of foam filling on compressive response of hexagonal cell aluminum honeycombs under axial loading-experimental study
In: Materials and design, 31 (3), 1216-1230, 2010
[DOI: 10.1016/j.matdes.2009.09.030]
Alavi Nia, A.
Sadeghi, M. Z.
 

Student thesis

 

Courses

Lectures Semester
Finite Element Methods in Lightweight Design SS17
Processes and Principles for Lightweight Design WS16/17
Finite Element Methods in Lightweight Design SS16
Processes and Principles for Lightweight Design WS15/16