Person

Martin Schubert

M. Sc.
Martin Schubert Copyright: © Alle Rechte vorbehalten
Lehrstuhl und Institut für Strukturmechanik und Leichtbau

Address

Building: 1320

Room: 415

Wüllnerstraße 7

52062 Aachen

Contact

WorkPhone
Phone: +49 241 80 96840

Office Hours

by appointment.
 

Research

  • Sizing and computation of composite structures
  • Development of multifunctional lightweight structures for satellites multiSat
  • Modeling, analysis and evaluation of aircraft structures GNOSIS

 

About Mr. Schubert

Martin Schubert studied Mechanical Engineering at RWTH Aachen University from 2007 until 2012 and in the year 2014 he received his master’s degree in Development and Design Engineering. In 2011 he went abroad for one semester to study at NTNU Trondheim University in Norway. In November 2014 he began working at the SLA as research assistant. His field of work comprises the calculation and simulation of composite structures and the development of multifunctional lightweight structures for satellite applications.


 

Publications

Source Author(s)
[Contribution to a conference proceedings]
Multifunctional Load Carrying Lightweight Structures for Space Design
In: Luft- und Raumfahrt - im Dienst der Gesellschaft : Deutscher Luft- und Raumfahrtkongress 2017 : 05.-07. September 2017, München / DGLR, 11 Seiten, 2017
Schubert, Martin (Corresponding author)
Perfetto, Sara
Dafnis, Athanasios
Mayer, Dirk (Collaboration author)
Atzrodt, Heiko
Schröder, Kai-Uwe
[Contribution to a conference proceedings]
Development and Design of Multifunctional Composite Structures for Satellite Applications
In: [15th European Conference on Spacecraft Structures, Materials and Environmental Testing, ECSSMET 2018, 2018-05-28 - 2018-06-01, Noordwijk, The Netherlands], 6 Seiten, 2018
Perfetto, Sara (Corresponding author)
Schubert, Martin
Mayer, Dirk
Dafnis, Athanasios
Atzrodt, Heiko
[Contribution to a book, Contribution to a conference proceedings]
Multifunctional and lightweight load-bearing composite structures for satellites
In: 8th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation : Glasgow, UK, September 4-7, 2018 / K. Kontis and S. Pantelakis (eds.), 00019, [1]-8, 2018
[DOI: 10.1051/matecconf/201823300019]
Schubert, Martin (Corresponding author)
Perfetto, Sara
Dafnis, Athanasios
Atzrodt, Heiko
Mayer, Dirk
[Abstract, Contribution to a conference proceedings]
Development and design of multifunctional lightweight structures for satellite applications
In: [69th International Astronautical Congress, IAC 2018, 2018-10-01 - 2018-10-05, Bremen, Germany], 1-2, 2018
Schubert, Martin (Corresponding author)
Pefertto, Sara
Dafnis, Athanasios
Mayer, Dirk
Atzrodt, Heiko
[Contribution to a book, Contribution to a conference proceedings]
Multifunctional load-bearing aerostructures with integrated space debris protection
In: 9th EASN International Conference on "Innovation in Aviation & Space" : Athens, Greece, September 3-6, 2019 / S. Pantelakis and C. Charitidis (Eds.), [1]-8, 2019
[DOI: 10.1051/matecconf/201930407003]
Schubert, Martin (Corresponding author)
Dafnis, Athanasios
 

Teaching

Course Semester
Grundlagen der Finite-Elemente-Methode SS20
Finite-Elemente-Methode für strukturdynamische und nichtlineare Probleme WS19/20
Grundlagen der Finite-Elemente-Methode SS19
Finite-Elemente-Methode für strukturdynamische und nichtlineare Probleme WS18/19

 

Student theses

Pending theses

MASTER THESIS: The influence of micrometeoroids on the operation of the HTS magnet in the Sun-Earth Lagrange point 2: Masterarbeit: AMS-100 - Einfluss von Mikrometeoroiden

BACHELOR/MINI/MASTER THESIS: On the dynamic characteristics of wings with distributed propulsion: Thesis: wings with distributed propulsion

Ongoing theses

-

Concluded theses

Aulich, S.: Design of a multifunctional and additively manufactured wing section (Bachelor Thesis)

Nainani, S.: Design of load introduction points for sandwich panels with printed lattice cores (Mini Thesis)

Milios, A.: Simulation of the mechanical and thermal behaviour of sandwich plates with different aluminium cores (Master Thesis)

Bauer, N.: Development and simulation of load introduction points for sandwich panels with printed lattice cores (Master Thesis)

Kalapis, S.: Development of a numerical test rig for the design of space structures against impact by space debris (Master Thesis)

George, K.; Hebartz, Y.; Post, S.: Design and simulation of the passive radiation shield for multifunctional satellite structures (Project Thesis)

Arabin, P.; Heidt, A.: Thermal investigation of inserts in sandwich panels for modular satellites (Project Thesis)

Richstein, R.: Dimensioning and simulation of the heat transfer capability of multifunctional lightweight structrues for satellites (Bachelor Thesis)

Dronskowski, M.: Design and dimensioning of multifunctional lightweight structures for satellites (Bachelor Thesis)

Reichartz, T., Röder, J.: Development of integrative concepts for multifunctional lightweight structres for satellites (Project Thesis)

Heins, T., Lim, S.: Development of an Insert Design Approach for Monocoque Sandwich Structures (Project Thesis)

Li, G.: Sizing and proof of strength of the fuselage of a wooden ultralight aircraft (Master Thesis)

Keusgen, A.: Development and Design of the Composite Structure of an Unmanned Aerial Vehicle with Tiltrotor for Transportation of Low Payloads (Master Thesis)

Kulkarni, D.: Development, Design and Proof of Strength of the Composite Structure of an Unmanned Aerial Vehicle with Tiltrotor (Master Thesis)

Spiewak, M. N.: Design and Dimensioning of the Front Fuselage of a Canard Sailplane (Bachelor Thesis)