Person
Dr.-Ing.Andreas Preisler
Address
Building: 1320
Room: 404
Wüllnerstraße 7
52062 Aachen
Research
Structural Health Monitoring (SHM):
Development of the efficient and robust SmartSHM concept on the basis of structural damage indicators and structural analysis - from the ideal model up to application on real structures.
About Mr. Preisler
Andreas Preisler studied Aeronautical Engineering at the University of Applied Science in Hamburg from 2008 to 2013, specializing on Lightweight Design. As a student he received the Buchpreis des Förderkreises Wagenbauschule in 2012 and a scholarship of the Fritz Kirchberg Stiftung for his extraordinary achievements during his bachelor’s degree. Preisler’s career started in 2011 as a student employee at the Elan Ausy GmbH in the Computer Aided Engineering department. Two years later he started working as researcher at the Institute of Structural Mechanics and Lightweight Design being responsible for the research field Structural Health Monitoring . Mr. Preisler developed during his education and career a profound knowledge in the field linear and nonlinear numerical analyses using Finite Element Method. In his PhD thesis, he is deriving efficient structural damage indicators based on structural analyses. Regarding his work at the SLA, he is responsible for the scientific research field of Structural Health Monitoring. Until winter semester 2017/2018, he gave courses in Mechanik I und Mechanik II.
Publications
Source | Author(s) |
---|---|
[Contribution to a book] Leichtbau 4.0 : Grundlagen und Potenziale des Structural Health Monitorings In: Handbuch Industrie 4.0 : Recht, Technik, Gesellschaft / Walter Frenz, Hrsg., 619-635, 2020 [DOI: 10.1007/978-3-662-58474-3_32] | Schröder, Kai-Uwe Preisler, Andreas |
[Book, Dissertation / PhD Thesis] Efficient damage detection and assessment based on structural damage indicators, xi, 107 Seiten : Illustrationen, Diagramme, 2020 [DOI: 10.2370/9783844072037] | Preisler, Andreas |
[Contribution to a book, Journal Article] Damage detection in adhesively bonded single lap joints by using backface strain : proposing a new position for backface strain gauges In: International journal of adhesion and adhesives, 97 (102494), 2019 [DOI: 10.1016/j.ijadhadh.2019.102494] | Sadeghi, Mohammed Zamaan Weiland, Josef Preisler, Andreas Zimmermann, Jannik Schiebahn, Alexander Reisgen, Uwe Schröder, Kai-Uwe |
[Contribution to a book, Contribution to a conference proceedings] A strain-based damage detection approach in adhesively bonded single lap joints In: [5th International Conference on Structural Adhesive Bonding, 2019-07-11 - 2019-07-12, Porto, Portugal], 2019 | Sadeghi, Mohammed Zamaan Weiland, Josef Preisler, Andreas Zimmermann, Jannik Reisgen, Uwe Schröder, Kai-Uwe Schiebahn, Alexander |
[Contribution to a book, Contribution to a conference proceedings] Faseroptische Schadensüberwachung von GFK-Blattfedern mittels struktureller Schadensindikatoren In: Smarte Strukturen und Systeme : Tagungsband des 4SMARTS-Symposiums, 22.-23. Mai 2019, Darmstadt / Martin Wiedemann, Tobias Melz (Hrsg.), 299-309, 2019 | Preisler, Andreas Wolf-Monheim, Friedrich Dafnis, Athanasios Schröder, Kai-Uwe van der Jagt, Pim David, Wolfgang Zandbergen, Paul |
[Contribution to a book, Contribution to a conference proceedings] Application of Kalman filter based neutral axis tracking for crack length quantification in beam structures In: Health Monitoring of Structural and Biological Systems XIII : 4-7 March 2019, Denver, Colorado, United States / Paul Fromme, Zhongqing Su (editors) ; sponsored by: SPIE, 2019 [DOI: 10.1117/12.2513859] | Soman, Rohan N. Schagerl, Martin Kralovec, Christoph Schröder, Kai U. Preisler, Andreas Ostachowicz, Wieslaw |
[Contribution to a conference proceedings] In-process integration of fibre optical sensors for structural condition monitoring of braided composite shaft In: [Smart Materials and Surfaces 2018, SMS 2018, 2018-10-23 - 2018-10-25, Venice, Italy], 1-9, 2018 [DOI: 10.26799/cp-sms-egf-nanomed2018] | Bareiro, Oscar Preisler, Andreas Drichel, Pascal Ackermann, Philippe Schröder, Kai-Uwe Gries, Thomas Jacobs, Georg Schmitt, Robert H. |
[Journal Article] Strukturelle Zustandsüberwachung geflochtener Verbundstrukturen In: Melliand-Textilberichte, 99 (2), 70-72, 2018 | Bareiro, Oscar Münch, Pia Katharina Gries, Thomas Preisler, Andreas Drichel, Pascal Ackermann, Philippe Schmitt, Robert H. |
[Journal Article] Intrinsic Damage Assessment of Beam Structures Based On Structural Damage Indicators In: American journal of engineering research : AJER, 7 (6), 56-70, 2018 | Preisler, Andreas Schröder, Kai-Uwe Schagerl, Martin |
[Contribution to a conference proceedings] Monitoring of fatigue damages in adhesively bonded joints In: [6th ECCOMAS Thematic Conference on the Mechanical Response of Composites, COMPOSITES 2017, 2017-09-20 - 2017-09-22, Eindhoven, Netherlands / J.J.C. Remmers and A. Turon (Editors)], 12 Seiten, 2017 | Preisler, Andreas Sadeghi, Mohammed Zamaan Schröder, Kai-Uwe |
[Contribution to a book, Contribution to a conference proceedings] Ein interdisziplinärer Ansatz zur intelligenten FVK Welle In: [4SMARTS 2017 - Symposium für Smarte Strukturen und Systeme, 2017-06-21 - 2017-06-22, Braunschweig, Germany], 15-25, 2017 | Preisler, Andreas Schröder, Kai-Uwe |
[Conference Presentation] smartSHM In: Instandhaltungsforum 2017 Dortmund 2017-04-06 - 2017-04-07, 2017 | Baltes, Ralph Schröder, Kai-Uwe Preisler, Andreas |
[Contribution to a book] Selected Aspects of Current Challenges in Composite Product Development for Automotive and Aerospace Industry In: Applied mechanics and materials. - 828, 51-63, 2016 [DOI: 10.4028/www.scientific.net/AMM.828.51] | Czichon, Steffen Köhnke, Jessica Preisler, Andreas Herranen, Henrik |
[Contribution to a book, Contribution to a conference proceedings] Damage Assessment in Adhesively Bonded Structures by Using SmartSHM In: [International Workshop on Structural Health Monitoring 2015, IWSHM 2015, 01.09.2015-03.09.2015, Stanford, US], 8 S., 2015 [DOI: 10.12783/SHM2015/27] | Preisler, Andreas Sadeghi, Mohammed Zamaan Adomeit, André Schröder, Kai-Uwe |
[Contribution to a conference proceedings, Journal Article] Crack diagnosis of metallic profiles based on structural damage indicators In: Journal of physics / Conference Series, 628 (1), 012006, 2015 [DOI: 10.1088/1742-6596/628/1/012006] | Preisler, Andreas Steenbock, C. Schröder, Kai-Uwe |
[Contribution to a conference proceedings] On the Damage Diagnosis Based on Structural Analysis Data In: EWSHM - 7th European Workshop on Structural Health Monitoring, 8 S., 2014 | Schröder, Kai-Uwe Preisler, Andreas Viechtbauer, Christoph Schagerl, Martin |
Completed student theses
Projekt theses:
- Srikanthavell, T. und Garmann, B.: Effiziente Strukturüberwachung eines FVK-Flügelmodells basierend auf strukturellen Schädigungsindikatoren am Flügelmodell. September 2015. (In cooperation with the Institute for Textile Technology)
Bachelor theses:
- Tödter, J.: Schadenserkennung und -bewertung von FVK Antriebswellen basierend auf strukturellen Schadensindikatoren. September 2016
- Rohsmann, V.: Strukturzustandsüberwachung in eindimensionalen metallischen Strukturen auf Basis struktureller Schadensindikatoren unter Betriebslasten. Februar 2016.
- Siyapje Noupa, G.: Monitoring of crack propagation in single lap adhesive joints based on structural damage indicators. October 2015.
Master theses:
- Richstein, R.: Concept and preliminary design of riveted joints for segmented rotor blades. Ongoing. (In cooperation with the Fraunhofer Institute for Wind Energy Systems)
- Siyapje Noupa, G.: Structural Health Monitoring of adhesively joined stiffened plates based on structural damage indicators. November 2017
- Strobel, N.: Erkennung und Bewertung von Schädigungen an CFK-Bauteilen mittels Selbstdetektion. February 2015. (In cooperation with the Institute for Engineering Design)
Open theses assignments
Bachelor-/Masterarbeit: Schadensüberwachung einer Blattfeder aus GFK
Lectures
Lectures | Semester |
---|---|
Mechanics I for BA&E (Mechanical Engineering) (Tutorial) | WS13/14, WS14/15, WS15/16, WS16/17, WS17/18 |
Mechanik II for BA&E (Mechanical Engineering) (Tutorial) | SS14, SS15, SS16, SS17 |
Processes and Principles for Lightweight Design (Tutorial) |
WS14/15 |